Carotenoid

From LifeWiki
Jump to navigation Jump to search
This article is a stub. You can help LifeWiki by expanding it.
This page is under construction. Sorry for the inconvenience.
Carotenoid
Carotenoid image
Pattern type Spaceship
Number of cells 10406
Bounding box 30304 × 30289
Direction Oblique
Period 237792 (mod: 237792)
Speed (66,11)c/118896 | (132,22)c/237792
Heat Unknown
Kinetic symmetry n
Discovered by Elijah Ken
Year of discovery 2026

Carotenoid is a flamingowise geminoid constructed by Elijah Ken on July 5, 2026.

The original form of the spaceship was constructed on March 18, 2026 and reduced to the current form using russellsprouts’ optimized Snarkmaker.

NOTE FOR FUTURE EDITS: INCLUDE NEWEST LV-VISIBLE SPACESHIP, INCLUDE MORE SOURCES, DISCOVERY INFO, REACTION DETAILS (there is a good post by Elijah Ken which details the mechanisms of the ship which might be good to include with modifications)

Design

While Elijah Ken's first carotenoid used a different recipe for each end (and some headache to toggle which recipe was active), all builds since then have used the same recipe at both ends of the spaceship. A summary of Elijah Ken's ship's mechanisms is shown below [1].

While demonoids may use the same recipe at both ends easily, for oblique geminoids it is a little harder. The problem for them, is that although the same recipe is being executed at each end, the ends have to travel in different directions relative to the midline.

(EDIT: USE A BETTER VIEW IMAGE THAT ISN'T REALLY LONG

(The state 4 arrow is the direction of the spaceship's motion, and the state 4 dotted lines indicate the diagonal a demonoid would go, to highlight the difference between diagonal and the direction of each side of the ship. White state 3 is the splitter modules, and the green state 1 gliders are an example tape, this one just p90)

If the tape being run at each end is the same, and the ends must act differently, the difference, of course, must be in the stable objects at each end which mark the construction. To make the spaceship as small as possible, it is important to minimize the amount of work involved in deciding which way to go. I use a 3 object mechanism to do this logic in the Carotenoid.

Observe that the circuitry is almost the same on each side, just mirrored over the diagonal; in fact, the only difference is the displacement of each copy relative to the previous copy. So, the only change needed is to move the target block - either the SPEBOE the salvo hits when it first comes out of the splitter, or move the target hand block for the slow salvo. Most of my carotenoids used the former method, but the latest, smallest versions used the latter, which is a clever idea proposed by russellsprouts.

Both methods involve creating both potential hand blocks, one near and one far. Here is a visual of this from the top left of the LV Carotenoid:

(EDIT: INCLUDE BETTER VISUAL THAT IS SMALLER)

Green: Newly constructed circuitry (though all the circuitry is only half-finished at this point) Red circuitry: The potential locations of future circuitry, the top one is the one we want (due to the direction this end of the ship is going) White: Old copy of circuitry, includes a boat (circled with red) that reflects the yellow glider along the dotted paths to destroy the circled yellow block, which was one of the two elbow blocks that we did not want to use. Yellow: the key objects in the switching reaction (although the boat is not yellow so that it connects more clearly to the part it was created with)

Summary of how the switching works: Two potential hand blocks are created during construction. After construction finishes, the construction arm bounces a glider off of a boat OTT that was constructed alongside the last copy of circuitry, destroying the hand block that we don't want to use next round. Which one is destroyed is controlled by the offset between the newly constructed circuitry and the last copy, which contains the boat. Thus, the direction of each end is perpetuated. You could, if you wanted, stop the trigger glider after it hits the boat, and remove the other block, to cause that end of the ship to suddenly change direction. It is possible to make a shrinking, self-destructing spaceship, or a growing, slowing spaceship from this design pretty trivially (if you know how).

References

[1]

  1. ↑ 1.0 1.1 Elijah Ken (November 13th, 2026). Re: Spaceship Discussion Thread (discussion thread) at the ConwayLife.com forums