Page 1 of 1
125/36/3
Posted: October 5th, 2015, 10:28 pm
by danieldb
2x2 with
extra 1 state:
First, a replicator:
Code: Select all
x = 6, y = 3, rule = 125/36/3
.A2.A$2A2.2A$.A2.A!
We can create a p12 c/3 spaceship with it.
Code: Select all
x = 6, y = 11, rule = 125/36/3
.A2.A$2A2.2A$.A2.A2$.A2.A$2A2.2A$.A2.A4$2A2.2A!
And now for some oscillators:
A p8 oscillator, "unix
rotor":
Code: Select all
x = 4, y = 4, rule = 125/36/3
2.2A$2.2A$2A.A$4A!
Another p8, "rotator":
Code: Select all
x = 4, y = 4, rule = 125/36/3
2.A$2A.A$A2.A$.2A!
Another p8 (noticing a pattern), unnamed:
Code: Select all
x = 7, y = 3, rule = 125/36/3
A2.2A$A.A.A.A$.2A2.2A!
A p6 oscillator, "Small K"
Code: Select all
x = 3, y = 3, rule = 125/36/3
A.A$AB$A.A!
A p6 oscillator, "Big K"
Code: Select all
x = 3, y = 4, rule = 125/36/3
A.A$AB$AB$A.A!
The p14 is now p18:
Code: Select all
x = 5, y = 5, rule = 125/36/3
2A$A2.A$4.A$.A$2.A!
A p4 oscillator, "To4d":
Code: Select all
x = 4, y = 4, rule = 125/36/3
.2A$A.A$.A.A$.2A!
This p4 is now p6:
Code: Select all
x = 5, y = 3, rule = 125/36/3
A2.2A$A3.A$.2A!
Another p4 to p6
Code: Select all
x = 3, y = 5, rule = 125/36/3
A$.A$.A$2.A$2A!
A p6 oscillator, unnamed:
Code: Select all
x = 8, y = 4, rule = 125/36/3
A6.A$2A4.2A$2.A2.A$3.2A!
Re: 125/36/3
Posted: October 7th, 2015, 4:45 pm
by danieldb
A p4 osc, "2 tails":
Code: Select all
x = 5, y = 5, rule = 125/36/3
3.2A$3.A$3.A$3A$A!
A p11 osc, "unnamed":
Code: Select all
x = 11, y = 7, rule = 125/36/3
2A$4.A$3.2A$4.A.A$6.2A$6.A$9.2A!
A p12 osc, "Paired M's":
Code: Select all
x = 5, y = 5, rule = 125/36/3
5A$.3A2$.3A$5A!
Re: 125/36/3
Posted: October 7th, 2015, 4:56 pm
by Xenonquark
You posted the patterns in such a way that they all explode. Is there any way to change it?
EDIT:
Now over 10 posts!
Re: 125/36/3
Posted: October 7th, 2015, 5:30 pm
by M. I. Wright
Xenonquark wrote:You posted the patterns in such a way that they all explode. Is there any way to change it?
Paste them into Golly, not the LifeViewer on this site. The viewer shouldn't actually be able to run the patterns - since they have more than two cell states - so it removes the extra states and flips the B/S part of the rule. That'll be fixed in the next update, according to the 'Pattern viewer for forum threads' thread.
Re: 125/36/3
Posted: October 8th, 2015, 4:43 pm
by danieldb
Now for fuses:
P4 domino fuse:
Code: Select all
x = 53, y = 52, rule = 125/36/3
2A$.2A$3.A$4.A$5.A$6.A$7.A$8.A$9.A$10.A$11.A$12.A$13.A$14.A$15.A$16.A
$17.A$18.A$19.A$20.A$21.A$22.A$23.A$24.A$25.A$26.A$27.A$28.A$29.A$30.
A$31.A$32.A$33.A$34.A$35.A$36.A$37.A$38.A$39.A$40.A$41.A$42.A$43.A$
44.A$45.A$46.A$47.A$48.A$49.A$50.A$51.A$52.A!
P2 No-fuse:
Code: Select all
x = 52, y = 53, rule = 125/36/3
A$.A$2A$2.A$3.A$4.A$5.A$6.A$7.A$8.A$9.A$10.A$11.A$12.A$13.A$14.A$15.A
$16.A$17.A$18.A$19.A$20.A$21.A$22.A$23.A$24.A$25.A$26.A$27.A$28.A$29.
A$30.A$31.A$32.A$33.A$34.A$35.A$36.A$37.A$38.A$39.A$40.A$41.A$42.A$
43.A$44.A$45.A$46.A$47.A$48.A$49.A$50.A$51.A!
P2 Duoplet fuse:
Code: Select all
x = 53, y = 53, rule = 125/36/3
.A$A.A$.2A$3.A$4.A$5.A$6.A$7.A$8.A$9.A$10.A$11.A$12.A$13.A$14.A$15.A$
16.A$17.A$18.A$19.A$20.A$21.A$22.A$23.A$24.A$25.A$26.A$27.A$28.A$29.A
$30.A$31.A$32.A$33.A$34.A$35.A$36.A$37.A$38.A$39.A$40.A$41.A$42.A$43.
A$44.A$45.A$46.A$47.A$48.A$49.A$50.A$51.A$52.A!
P9(?) Double-Duoplet fuse:
Code: Select all
x = 53, y = 55, rule = 125/36/3
A$.A$2.A$A.A$.2A$3.A$4.A$5.A$6.A$7.A$8.A$9.A$10.A$11.A$12.A$13.A$14.A
$15.A$16.A$17.A$18.A$19.A$20.A$21.A$22.A$23.A$24.A$25.A$26.A$27.A$28.
A$29.A$30.A$31.A$32.A$33.A$34.A$35.A$36.A$37.A$38.A$39.A$40.A$41.A$
42.A$43.A$44.A$45.A$46.A$47.A$48.A$49.A$50.A$51.A$52.A!
Re: 125/36/3
Posted: October 8th, 2015, 5:04 pm
by danieldb
P4 "Two tails" fuse:
Code: Select all
x = 54, y = 54, rule = 125/36/3
2.A$3.A$A2.A$.3A$4.A$5.A$6.A$7.A$8.A$9.A$10.A$11.A$12.A$13.A$14.A$15.
A$16.A$17.A$18.A$19.A$20.A$21.A$22.A$23.A$24.A$25.A$26.A$27.A$28.A$
29.A$30.A$31.A$32.A$33.A$34.A$35.A$36.A$37.A$38.A$39.A$40.A$41.A$42.A
$43.A$44.A$45.A$46.A$47.A$48.A$49.A$50.A$51.A$52.A$53.A!
Re: 125/36/3
Posted: October 9th, 2015, 2:53 pm
by Lewis
P14 wick:
Code: Select all
x = 6, y = 54, rule = 125/36/3
6A$.4A3$.4A$6A7$6A$.4A3$.4A$6A7$6A$.4A3$.4A$6A7$6A$.4A3$.4A$6A7$6A$.
4A3$.4A$6A!
Re: 125/36/3
Posted: October 9th, 2015, 4:44 pm
by danieldb
P4 smallest p3 fuse:
Code: Select all
x = 54, y = 52, rule = 125/36/3
.2A$4A$4.A$5.A$6.A$7.A$8.A$9.A$10.A$11.A$12.A$13.A$14.A$15.A$16.A$17.
A$18.A$19.A$20.A$21.A$22.A$23.A$24.A$25.A$26.A$27.A$28.A$29.A$30.A$
31.A$32.A$33.A$34.A$35.A$36.A$37.A$38.A$39.A$40.A$41.A$42.A$43.A$44.A
$45.A$46.A$47.A$48.A$49.A$50.A$51.A$52.A$53.A!
Re: 125/36/3
Posted: October 11th, 2015, 3:28 pm
by danieldb
A new natural p4 osc:
Code: Select all
x = 5, y = 5, rule = 125/36/3
.2A$A3.A$.2A.A$3.A$.2A!
A similar natural p4, but with 2 rotors:
Code: Select all
x = 5, y = 6, rule = 125/36/3
.2A$2.A$A.A.A$A.A.A$2.A$.2A!
Another p4 osc:
Code: Select all
x = 6, y = 5, rule = 125/36/3
.2A$A3.A$4A.A$5.A$2.2A!
Re: 125/36/3
Posted: October 11th, 2015, 7:29 pm
by danieldb
First, an almost spaceship:
Code: Select all
x = 6, y = 8, rule = 125/36/3
.A2.A$2A2.2A$.A2.A4$.A2.A$A4.A!
And a quadratic growth pattern:
Code: Select all
x = 8, y = 13, rule = 125/36/3
2.A2.A$.2A2.2A$2.A2.A2$2.A2.A$.2A2.2A$2.A2.A4$2A4.2A$.2A2.2A$2A4.2A!
A few orthoganal fuses:
No-fuse 1:
Code: Select all
x = 147, y = 1, rule = 125/36/3
3A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A!
No-fuse 2:
Code: Select all
x = 153, y = 2, rule = 125/36/3
A$3A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A!
P68 smallest p2 fuse:
Code: Select all
x = 153, y = 2, rule = 125/36/3
A$3A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A!
P10 Domino fuse:
Code: Select all
x = 153, y = 2, rule = 125/36/3
2.A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A
.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A
.2A.2A.2A.2A.2A$2A!
P3 double domino fuse:
Code: Select all
x = 154, y = 5, rule = 125/36/3
2A$3.A$2.A.3A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A.2A.2A$3.A$2A!
P6 double duoplet fuse:
Code: Select all
x = 151, y = 3, rule = 125/36/3
A$.3A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A$A!
P33 fuse:
Code: Select all
x = 153, y = 3, rule = 125/36/3
3A$4.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.2A.
2A.2A.2A.2A.2A.2A$.2A!
Re: 125/36/3
Posted: October 11th, 2015, 8:40 pm
by M. I. Wright
danieldb wrote:First, an almost spaceship:
Code: Select all
x = 6, y = 8, rule = 125/36/3
.A2.A$2A2.2A$.A2.A4$.A2.A$A4.A!
This, for obvious reasons, is called a growing spaceship. Here it is on its own (left side), plus a slightly faster-growing variant where the replicators aren't emulating Rule 90:
Code: Select all
x = 30, y = 33, rule = 125/36/3
2A2.2A18.2A2.2A6$25.A2.A$24.2A2.2A$25.A2.A2$.A2.A$2A2.2A$.A2.A2$25.A
2.A$24.2A2.2A$25.A2.A14$25.A2.A$24.2A2.2A$25.A2.A!
And a quadratic growth pattern:
Code: Select all
x = 8, y = 13, rule = 125/36/3
2.A2.A$.2A2.2A$2.A2.A2$2.A2.A$.2A2.2A$2.A2.A4$2A4.2A$.2A2.2A$2A4.2A!
...did you paste the pattern wrong? Quadratic growth has to be continuous; this makes only one pair of replicators before becoming a growing spaceship.
Replicator+duoplet = puffer
Code: Select all
x = 6, y = 8, rule = 125/36/3
5.A$4.A4$.A2.A$2A2.2A$.A2.A!
Re: 125/36/3
Posted: October 12th, 2015, 4:52 pm
by danieldb
P4 6-domino fuse:
Code: Select all
x = 54, y = 54, rule = 125/36/3
.2A$A2.A$A2.A$.3A$4.A$5.A$6.A$7.A$8.A$9.A$10.A$11.A$12.A$13.A$14.A$
15.A$16.A$17.A$18.A$19.A$20.A$21.A$22.A$23.A$24.A$25.A$26.A$27.A$28.A
$29.A$30.A$31.A$32.A$33.A$34.A$35.A$36.A$37.A$38.A$39.A$40.A$41.A$42.
A$43.A$44.A$45.A$46.A$47.A$48.A$49.A$50.A$51.A$52.A$53.A!
Re: 125/36/3
Posted: April 15th, 2020, 11:03 am
by dani
p192 gun:
Code: Select all
x = 205, y = 127, rule = 125/36/3
95.ABA8.ABA$95.BA10.AB$95.ABA8.ABA48$100.A2.A$99.2A2.2A$100.A2.A13$AB
A$BAB$A.A2$63.A7.A$62.3A5.3A$198.A.A$199.B$62.3A5.3A125.3A$63.A7.A$
128.ABA5.ABA$A.A125.ABA5.ABA$BAB126.A7.A$ABA126.A7.A$128.ABA5.ABA$
128.ABA5.ABA2$100.A2.A94.3A$99.2A2.2A94.B$100.A2.A94.A.A29$202.ABA$
202.BAB$202.A.A2$137.A$136.3A61.B3$136.3A61.B$137.A2$202.A.A$202.BAB$
202.ABA!
Code: Select all
x = 203, y = 122, rule = 125/36/3
95.ABA$96.AB$95.ABA47$99.A2.A$98.2A2.2A$99.A2.A14$A.A$BAB$ABA$62.A7.A
$61.3A5.3A2$196.3A$61.3A5.3A125.B$62.A7.A125.A.A$127.ABA5.ABA$127.ABA
5.ABA$128.A7.A$128.A7.A$127.ABA5.ABA$127.ABA5.ABA2$99.A2.A$98.2A2.2A$
99.A2.A30$200.A.A$200.BAB$200.ABA$136.A$135.3A$200.2A$200.2BA$135.3A
61.A.B$136.A63.A!
I didn't want to make a new post for this as a) it is not that notable and b) i'm trying to keep my 1000 posts as long as possible[/i]
Re: 125/36/3
Posted: April 15th, 2020, 7:58 pm
by FWKnightship
C/4:
Code: Select all
x = 17, y = 17, rule = 125/36/3
3.A2.A3.A2.A$4.2A5.2A$5.A.A.A.A$.A.2A.2A.2A.2A.A$2A3.A5.A3.2A$2.2A4.A
4.2A$3.A.A.3A.A.A$4.2B5.2B$.A3.3A.3A3.A$.A3.3A.3A3.A$2.ABABA3.ABABA$
3.3A5.3A$2.BA9.AB$.A.2B7.2B.A$3.A.A5.A.A$5.A5.A$4.A7.A!
EDIT:
Code: Select all
x = 18, y = 17, rule = 125/36/3
3.A2.A4.A2.A$4.2A6.2A$5.A.A2.A.A$.A.2A.2A2.2A.2A.A$2A3.A6.A3.2A$2.2A
4.2A4.2A$3.A.A.4A.A.A$4.2B6.2B$.A3.3A2.3A3.A$.A3.3A2.3A3.A$2.ABABA4.A
BABA$3.3A6.3A$2.BA10.AB$.A.2B8.2B.A$3.A.A6.A.A$5.A6.A$4.A8.A!
EDIT2:P5:
Code: Select all
x = 5, y = 7, rule = 125/36/3
3.2A$3.A$4.A$2A.2A$A$.A$2A!
EDIT3:P5,P10:
Code: Select all
x = 30, y = 13, rule = 125/36/3
21.A$6.2A12.A$3.B.A17.A$5.BA17.A3.A$A3.3A2.B14.A4.A$A.2A3.A12.3ABA$.A
BA3.ABA9.A2.B.B2.A$3.A3.2A.A11.AB3A$.B2.3A3.A6.A4.A$4.AB12.A3.A$5.A.B
15.A$3.2A21.A$25.A!
Oscillator collection:
Code: Select all
x = 92, y = 293, rule = 125/36/3
9.2A.2A.2A2$18.A$18.A2$18.A$18.A$47.2A12.A15.2A$18.A42.A$18.A28.4A26.
2A$24.2A7.2A11.A14.A10.A.3A2.3A.A$9.2A.2A.2A9.A5.A14.2A7.A.3A.3A.A5.A
.A6.A.A$25.2A7.2A8.A3.A7.A.A5.A.A9.A2.A$18.A22.A.A.A14.A.A10.3A4.3A$
18.A22.A.A.2A10.3A3.3A6.A10.A$43.A12.A9.A6.A8.A$18.A24.A13.A7.A$18.A
2$18.A$18.A2$9.2A.2A.2A10$7.A10.A$7.A10.A2$7.A10.A$7.A10.A$88.2A$7.A
10.A56.2A9.A4.A$7.A10.A17.2A7.2A8.2A7.2A9.B2.A.A5.A.4A$25.2A9.A6.A9.A
3.A7.A9.2A.A.A6.A$9.2A.2A.2A8.A.A8.A6.A.2A5.A.4A5.A.A.A5.A2.A11.A2B$
24.A.A6.3A8.A7.A10.A.A.A5.A3.3A8.A2B$18.A6.2A6.A11.2A7.2A9.A14.A6.A$
18.A45.2A13.A6.A.4A$86.A4.A$18.A69.2A$18.A2$18.A$18.A10$9.2A.2A.2A2$
7.A$7.A2$7.A$7.A32.2A$37.B.A$7.A19.2A10.BA$7.A19.A6.A3.3A2.B$28.A5.A.
2A3.A$9.2A.2A.2A7.2A.2A6.ABA3.ABA$24.A12.A3.2A.A$18.A6.A9.B2.3A3.A$
18.A5.2A12.AB$39.A.B$18.A18.2A$18.A2$18.A$18.A2$9.2A.2A.2A8$9.2A.2A.
2A2$7.A$7.A2$7.A$7.A2$7.A$7.A25.A17.2A$24.A.A7.A6.A.A8.A5.A6.A$9.2A.
2A.2A8.BA7.A7.BA6.A7.2A4.2A$24.A.A8.A6.BA6.A9.A2.A$7.A10.A14.2A6.A.A
7.2A8.2A$7.A10.A2$7.A10.A$7.A10.A2$7.A10.A$7.A10.A2$9.2A.2A.2A8$9.2A.
2A.2A2$7.A10.A$7.A10.A2$7.A10.A$7.A10.A2$7.A10.A$7.A10.A6.2A19.2A$25.
A.A5.2A2.2A9.A$9.2A.2A.2A7.A2.A5.A2.A2.A6.2A.A$25.2A8.2A2.A7.A.A$7.A
10.A$7.A10.A2$7.A10.A$7.A10.A2$7.A10.A$7.A10.A2$9.2A.2A.2A8$9.2A.2A.
2A2$A6.A10.A$A6.A10.A2$A6.A10.A9.A$A6.A10.A8.A$30.A$A6.A10.A12.A3.A$A
6.A10.A12.A4.A$27.3ABA$26.A2.B.B2.A$29.AB3A$A6.A10.A5.A4.A$A6.A10.A6.
A3.A$30.A$A6.A10.A14.A$A6.A10.A13.A2$A6.A10.A$A6.A10.A2$9.2A.2A.2A10$
A17.A$A17.A2$A17.A$A17.A2$A17.A5.2A$A17.A9.A$27.2A$28.A.A$30.2A$A17.A
11.A$A17.A14.2A2$A17.A$A17.A2$A17.A$A17.A10$9.2A.2A.2A2$A17.A$A17.A2$
A17.A19.A.A7.A.A$A17.A20.B9.B$38.3A7.3A$A17.A$A17.A7.5A11.ABA$27.3A
12.ABA$9.2A.2A.2A26.A$27.3A13.A$A6.A18.5A11.ABA$A6.A34.ABA2$A6.A30.3A
7.3A$A6.A31.B9.B$38.A.A7.A.A$A6.A$A6.A2$9.2A.2A.2A8$9.2A.2A.2A2$A6.A$
A6.A2$A6.A$A6.A2$A6.A$A6.A$25.2A$9.2A.2A.2A7.2A$28.2A$A6.A10.A8.2A$A
6.A10.A2$A6.A10.A$A6.A10.A2$A6.A10.A$A6.A10.A2$9.2A.2A.2A8$9.2A.2A.2A
2$A6.A10.A$A6.A10.A2$A6.A10.A$A6.A10.A2$A6.A10.A$A6.A10.A5.2A$24.A2.A
$9.2A.2A.2A11.A$25.A$A6.A10.A7.A$A6.A10.A2$A6.A10.A$A6.A10.A2$A6.A10.
A$A6.A10.A2$9.2A.2A.2A!
Re: 125/36/3
Posted: October 20th, 2021, 11:43 am
by dani
danieldb wrote: October 11th, 2015, 7:29 pm
First, an almost spaceship:
Code: Select all
x = 6, y = 8, rule = 125/36/3
.A2.A$2A2.2A$.A2.A4$.A2.A$A4.A!
Completed (puffer 1):
Code: Select all
x = 14, y = 24, rule = 125/36/3
3.A3.A.A.A.A$3.A3.A.A.A.A$7.ABA.ABA$7.ABA.ABA$3.A3.A.A.A.A$7.A.A.A.A
4$4.A3.A3.A$5.A.A.A.A.A$A5.A2B3.2B$A5.A2B3.2B$5.A.A.A.A.A$4.A3.A3.A4$
3.A3.A.A.A.A$3.A3.A.A.A.A$7.ABA.ABA$7.ABA.ABA$3.A3.A.A.A.A$3.A3.A.A.A
.A!
Re: 125/36/3
Posted: October 21st, 2021, 1:26 am
by Ohhhhhhhhh
danieldb wrote: October 11th, 2015, 7:29 pm
And a quadratic growth pattern:
Code: Select all
x = 8, y = 13, rule = 125/36/3
2.A2.A$.2A2.2A$2.A2.A2$2.A2.A$.2A2.2A$2.A2.A4$2A4.2A$.2A2.2A$2A4.2A!
Wait, that isn't a quadratic growth since it didn't spawns infinite growths infinitely...
But the reaction is useful if you want to build one.