Forums for Conway's Game of Life
https://conwaylife.com/forums/
Any chance you could post the offending script? It would help enormously if you could create a version of the script that is as small as possible but still causes the same crash. Is the crash 100% reproducible?Extrementhusiast wrote:Running a script that changes a .table file crashes Golly...
Code: Select all
from random import randint
import golly as g
def f(n):
line = [0, 0, 0, 0, 0, 0, 0, 0, n]
i = 0
while i < 8:
j = 0
while j <= i:
line[j] = 1
j += 1
file.write('%d,%d,%d,%d,%d,%d,%d,%d,%d,%d\n' % (line[8], line[7], line[6], line[5], line[4], line[3], line[2], line[1], line[0], r()))
j = 0
while j <= i:
line[j] = 2
file.write('%d,%d,%d,%d,%d,%d,%d,%d,%d,%d\n' % (line[8], line[7], line[6], line[5], line[4], line[3], line[2], line[1], line[0], r()))
j += 1
i += 1
def r():
if randint(0, 2) == 2:
return randint(0, 2)
else:
return 0
file = open(g.getdir('rules') + 'test.table', 'w')
file.write('n_states:3\n')
file.write('neighborhood:Moore\n')
file.write('symmetries:permute\n\n')
f(0)
file.write('%d,%d,%d,%d,%d,%d,%d,%d,%d,%d\n' % (1, 0, 0, 0, 0, 0, 0, 0, 0, r()))
f(1)
file.write('%d,%d,%d,%d,%d,%d,%d,%d,%d,%d\n' % (2, 0, 0, 0, 0, 0, 0, 0, 0, r()))
f(2)
file.close()
g.new('testing rule')
g.setalgo('RuleLoader')
g.setrule('test')
g.select([0, 0, 100, 100])
g.randfill(33)
g.select([])
g.fit()
Yes, as I had previously gone through a debacle where Golly couldn't find Python, even though I provided the correct file address. As it turns out, that's what happens when you have 64-bit Golly look for 32-bit Python. (With the 64-bit python, preset scripts like oscar.py do work.)Andrew wrote:Just to be clear, are you sure you're using a 64-bit Python? A 64-bit Golly requires that. (If the supplied Python scripts like oscar.py run ok then you're presumably using a compatible Python.)
Code: Select all
from glife import validint
import golly as g
num_string=g.getstring("Enter the number of samples:")
if not validint(num_string) :
g.exit("This is not a valid number.")
else :
num_samples=int(num_string)
margin=127
soup_width=2*margin+1
pop_t=0
pop_t_minus_one=0
pop=0
maxpop=0
prev_maxpop=0
pop_data=[]
# Clear the current layer
g.new("work")
for i in range(num_samples) :
# Change to a dummy rule
g.setrule("B/S")
# Create random soup
g.select([0, 0, soup_width, soup_width])
g.randfill(50)
g.select([])
# Change rule to WFLanalyze-1
g.setrule("WFLanalyze-1")
# Set central cell
g.setcell(margin,margin,3)
# Run pattern until stabilization
for j in range(1001) :
if j==1000 :
g.exit("Overflow on a sample.")
pop_t_minus_one=int(g.getpop())
g.run(1)
pop_t=int(g.getpop())
if pop_t==pop_t_minus_one :
break
# Change rule to WFLanalyze-2
g.setrule("WFLanalyze-2")
# Step pattern
g.run(1)
# Record population
pop=int(g.getpop())
# Increment table
if pop>maxpop :
prev_maxpop=maxpop
maxpop=pop
for j in range(prev_maxpop,maxpop) :
pop_data.append(0)
pop_data[pop-1]+=1
# Reset
g.reset()
# END
# Create new layer
g.new("data")
# FOR LOOP:
for i in range(len(pop_data)) :
if pop_data[i]!=0 :
for j in range(pop_data[i]) :
g.setcell(i,-j-1,1)
# END
Code: Select all
from random import randint