Page 247 of 247

Re: Thread for basic questions

Posted: November 14th, 2026, 10:37 pm
by NNlk05
Termite wrote: November 14th, 2026, 10:33 pm it says smth like {1,0,1,0,0,0,1,0,1,1}
Ruletables

Re: Thread for basic questions

Posted: November 14th, 2026, 10:38 pm
by dvgrn
Termite wrote: November 14th, 2026, 10:33 pm it says smth like {1,0,1,0,0,0,1,0,1,1}
That's one of the things that a line of a rule table can look like, yes.

Read through the tutorial link I sent, and/or the link that NNlk05 sent. If you have more specific questions after you've done that, then ask more specific questions.

Re: Thread for basic questions

Posted: November 14th, 2026, 10:49 pm
by Termite
dvgrn wrote: November 14th, 2026, 10:38 pm
Termite wrote: November 14th, 2026, 10:33 pm it says smth like {1,0,1,0,0,0,1,0,1,1}
That's one of the things that a line of a rule table can look like, yes.

Read through the tutorial link I sent, and/or the link that NNlk05 sent. If you have more specific questions after you've done that, then ask more specific questions.
how to use the rule

Re: Thread for basic questions

Posted: November 14th, 2026, 11:11 pm
by NNlk05
Termite wrote: November 14th, 2026, 10:49 pm
dvgrn wrote: November 14th, 2026, 10:38 pm
Termite wrote: November 14th, 2026, 10:33 pm it says smth like {1,0,1,0,0,0,1,0,1,1}
That's one of the things that a line of a rule table can look like, yes.

Read through the tutorial link I sent, and/or the link that NNlk05 sent. If you have more specific questions after you've done that, then ask more specific questions.
how to use the rule
You can use the rule by (in LifeViewer) placing the ruletable after the final ! in the RLE

Code: Select all

x = 0, y = 0, rule = testing_p240591
!
@RULE testing_p240591
Just testing

@TABLE
n_states:2
neighborhood:Moore
symmetries:permute
0, 1,1,1,0,0,0,0,0, 1
1, 0,0,0,0,0,0,0,0, 0
1, 1,0,0,0,0,0,0,0, 0
1, 1,1,1,1,0,0,0,0, 0
1, 1,1,1,1,1,0,0,0, 0
1, 1,1,1,1,1,1,0,0, 0
1, 1,1,1,1,1,1,1,0, 0
1, 1,1,1,1,1,1,1,1, 0

@COLORS
0 0 0 0
1 0 255 255

Re: Thread for basic questions

Posted: November 14th, 2026, 11:16 pm
by Termite
NNlk05 wrote: November 14th, 2026, 11:11 pm
Termite wrote: November 14th, 2026, 10:49 pm
dvgrn wrote: November 14th, 2026, 10:38 pm
That's one of the things that a line of a rule table can look like, yes.

Read through the tutorial link I sent, and/or the link that NNlk05 sent. If you have more specific questions after you've done that, then ask more specific questions.
how to use the rule
You can use the rule by (in LifeViewer) placing the ruletable after the final ! in the RLE

Code: Select all

x = 0, y = 0, rule = testing_p240591
!
@RULE testing_p240591
Just testing

@TABLE
n_states:2
neighborhood:Moore
symmetries:permute
0, 1,1,1,0,0,0,0,0, 1
1, 0,0,0,0,0,0,0,0, 0
1, 1,0,0,0,0,0,0,0, 0
1, 1,1,1,1,0,0,0,0, 0
1, 1,1,1,1,1,0,0,0, 0
1, 1,1,1,1,1,1,0,0, 0
1, 1,1,1,1,1,1,1,0, 0
1, 1,1,1,1,1,1,1,1, 0

@COLORS
0 0 0 0
1 0 255 255

Code: Select all

x=0, y=0, Rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
it only has 2 states

Re: Thread for basic questions

Posted: November 14th, 2026, 11:29 pm
by dvgrn
Termite wrote: November 14th, 2026, 11:16 pm it only has 2 states
Interesting! That might be a LifeViewer bug that's worth fixing. It's defaulting to plain two-state Life.

It works fine with the "r" in "rule" changed to lowercase:

Code: Select all

x=0, y=0, rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255

Re: Thread for basic questions

Posted: November 14th, 2026, 11:32 pm
by Termite
dvgrn wrote: November 14th, 2026, 11:29 pm
Termite wrote: November 14th, 2026, 11:16 pm it only has 2 states
Interesting! That might be a LifeViewer bug that's worth fixing. It's defaulting to plain two-state Life.

It works fine with the "r" in "rule" changed to lowercase:

Code: Select all

x=0, y=0, rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
yay
now i'll start working on the second rule

how to make range 2 rule like
starting state, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24, ending state

Re: Thread for basic questions

Posted: November 15th, 2026, 2:59 am
by I6_I6
Termite wrote: November 14th, 2026, 11:16 pm
NNlk05 wrote: November 14th, 2026, 11:11 pm
Termite wrote: November 14th, 2026, 10:49 pm

how to use the rule
You can use the rule by (in LifeViewer) placing the ruletable after the final ! in the RLE

Code: Select all

x = 0, y = 0, rule = testing_p240591
!
@RULE testing_p240591
Just testing

@TABLE
n_states:2
neighborhood:Moore
symmetries:permute
0, 1,1,1,0,0,0,0,0, 1
1, 0,0,0,0,0,0,0,0, 0
1, 1,0,0,0,0,0,0,0, 0
1, 1,1,1,1,0,0,0,0, 0
1, 1,1,1,1,1,0,0,0, 0
1, 1,1,1,1,1,1,0,0, 0
1, 1,1,1,1,1,1,1,0, 0
1, 1,1,1,1,1,1,1,1, 0

@COLORS
0 0 0 0
1 0 255 255

Code: Select all

x=0, y=0, Rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
it only has 2 states
I think it could be because the ruletable from NNlk05's quoted post is messing things up. It's probably not a coincidence that the color schemes are the same. The error doesn't happen below, even though changing the "r" to lowercase doesn't affect the ruletable or RLE.
dvgrn wrote: November 14th, 2026, 11:29 pm
Termite wrote: November 14th, 2026, 11:16 pm it only has 2 states
Interesting! That might be a LifeViewer bug that's worth fixing. It's defaulting to plain two-state Life.

It works fine with the "r" in "rule" changed to lowercase:

Code: Select all

x=0, y=0, rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
Termite wrote: November 14th, 2026, 11:32 pm [...]
yay
now i'll start working on the second rule

how to make range 2 rule like
starting state, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24, ending state
According to https://github.com/gollygang/ruletabler ... ki/RoadMap, Moore_radius2 isn't supported by Golly or LifeViewer.

Re: Thread for basic questions

Posted: November 15th, 2026, 9:23 am
by Termite
I6_I6 wrote: November 15th, 2026, 2:59 am According to https://github.com/gollygang/ruletabler ... ki/RoadMap, Moore_radius2 isn't supported by Golly or LifeViewer.
Then what does support it?

EDIT by dvgrn: Edited the above quote to take out the very long nested quotes of irrelevant test rule tables -- for readability, please review forum rule 3d and avoid pointlessly super-long quotes.

Re: Thread for basic questions

Posted: November 15th, 2026, 9:24 am
by I6_I6
Termite wrote: November 15th, 2026, 9:23 am
I6_I6 wrote: November 15th, 2026, 2:59 am [...]
According to https://github.com/gollygang/ruletabler ... ki/RoadMap, Moore_radius2 isn't supported by Golly or LifeViewer.
Then what does support it?
Nothing I know of :(

Re: Thread for basic questions

Posted: November 15th, 2026, 9:26 am
by Termite
I6_I6 wrote: November 15th, 2026, 9:24 am
Termite wrote: November 15th, 2026, 9:23 am
I6_I6 wrote: November 15th, 2026, 2:59 am [...]
According to https://github.com/gollygang/ruletabler ... ki/RoadMap, Moore_radius2 isn't supported by Golly or LifeViewer.
Then what does support it?
Nothing I know of :(
Then I have to code an extension myself :x
This will take a while...

Re: Thread for basic questions

Posted: November 15th, 2026, 10:21 am
by MDA
What is the inserter with the fastest known repeat time?

Re: Thread for basic questions

Posted: November 15th, 2026, 2:15 pm
by I6_I6
In ruletables, is there a simpler way to specify that a state doesn't have a special icon than to add an empty icon in its place?

Re: Thread for basic questions

Posted: November 15th, 2026, 10:14 pm
by dvgrn
MDA wrote: November 15th, 2026, 10:21 am What is the inserter with the fastest known repeat time?
Stable or periodic inserter? Inserting what type of signal into what kind of stream? Does the inserter need to insert the signal in front of existing signals, or just behind previous signals as quickly as possible?

For stable circuitry, variants of RNE-19T84 are still pretty good -- repeat time technically 35 according to the wiki page, but in practice generally more than that because it's hard to feed in inputs at that speed.

Re: Thread for basic questions

Posted: November 16th, 2026, 2:20 am
by MDA
dvgrn wrote: November 15th, 2026, 10:14 pm […]

Stable or periodic inserter? Inserting what type of signal into what kind of stream? Does the inserter need to insert the signal in front of existing signals, or just behind previous signals as quickly as possible?

For stable circuitry, variants of RNE-19T84 are still pretty good -- repeat time technically 35 according to the wiki page, but in practice generally more than that because it's hard to feed in inputs at that speed.
I mean inserters like Fx119 or NW31 (but faster), where the end of the inserter (to the left of the glider in the image for RNE-19T84) is unobstructed.

Re: Thread for basic questions

Posted: November 18th, 2026, 1:03 pm
by Entity Valkyrie 2
MDA wrote: November 16th, 2026, 2:20 am
dvgrn wrote: November 15th, 2026, 10:14 pm […]

Stable or periodic inserter? Inserting what type of signal into what kind of stream? Does the inserter need to insert the signal in front of existing signals, or just behind previous signals as quickly as possible?

For stable circuitry, variants of RNE-19T84 are still pretty good -- repeat time technically 35 according to the wiki page, but in practice generally more than that because it's hard to feed in inputs at that speed.
I mean inserters like Fx119 or NW31 (but faster), where the end of the inserter (to the left of the glider in the image for RNE-19T84) is unobstructed.
At the moment it is probably SE23 (which is not on the wiki for some reason), which has a repeat time of 34 ignoring FNG, or 57 with eater 5:

Code: Select all

x = 41, y = 21, rule = StateInvestigator
19.2A$19.A.A2.2A$16.A4.A3.A$3.A12.5A.3A$.3A16.A.A$A15.3A.A.A$2A13.A2.
A.2A$15.2A3$.2A$A2.A$A4.A14.A$.6A13.A.A$4.A.2A12.3A14.2A$4.A.A15.A9.
2A3.A$4.2A26.A.A3.3A$26.Q3.A.A.4A2.A$20.C4.DE3.2A5.A$23.EDE10.A$36.2A
!

Code: Select all

x = 42, y = 27, rule = B3/S23
20b2o$20bobo2b2o$17bo4bo3bo$4bo12b5ob3o$2b3o16bobo$bo15b3obobo$b2o13bo
2bob2o$16b2o5$3o2bo15bo$obo2bo15bobo$o3bo16b3o14b2o$b2o20bo9b2o3bo$bo
31bobo3b3o$31bobob4o2bo$31b2o5bo$19bo3b2o12bo$18bobo3bo12b2o$18b2o3bo$
22bo$18b5obo$18bo4bobo$20bo2bobo$19b2o3bo!