Thread for basic questions

A place, especially for newcomers, to ask questions and learn the basics.
User avatar
NNlk05
Posts: 911
Joined: January 14th, 2026, 8:42 pm
Location: Exploring in the Jungle of the INT Rulespace
Contact:

Re: Thread for basic questions

Post by NNlk05 »

Termite wrote: November 14th, 2026, 10:33 pm it says smth like {1,0,1,0,0,0,1,0,1,1}
Ruletables
Feci quod potui, faciant meliora potentes.

Code: Select all

x = 10, y = 3, rule = B34twz/S23
b2o4b2o$obo4bobo$2bo4bo!
[[ AUTOSTART AUTOHIDEGUI TRACK 0 -47/270 ZOOM 4 GPS 45 STEP 3 THEME BOOK ]]
https://nnlk05.github.io

=3
The world is my country, science my religion.
User avatar
dvgrn
Moderator
Posts: 12063
Joined: May 17th, 2009, 11:00 pm
Location: Madison, WI
Contact:

Re: Thread for basic questions

Post by dvgrn »

Termite wrote: November 14th, 2026, 10:33 pm it says smth like {1,0,1,0,0,0,1,0,1,1}
That's one of the things that a line of a rule table can look like, yes.

Read through the tutorial link I sent, and/or the link that NNlk05 sent. If you have more specific questions after you've done that, then ask more specific questions.
User avatar
Termite
Posts: 187
Joined: August 29th, 2026, 9:16 pm
Location: Earth
Contact:

Re: Thread for basic questions

Post by Termite »

dvgrn wrote: November 14th, 2026, 10:38 pm
Termite wrote: November 14th, 2026, 10:33 pm it says smth like {1,0,1,0,0,0,1,0,1,1}
That's one of the things that a line of a rule table can look like, yes.

Read through the tutorial link I sent, and/or the link that NNlk05 sent. If you have more specific questions after you've done that, then ask more specific questions.
how to use the rule
Life is life

termitidae
User avatar
NNlk05
Posts: 911
Joined: January 14th, 2026, 8:42 pm
Location: Exploring in the Jungle of the INT Rulespace
Contact:

Re: Thread for basic questions

Post by NNlk05 »

Termite wrote: November 14th, 2026, 10:49 pm
dvgrn wrote: November 14th, 2026, 10:38 pm
Termite wrote: November 14th, 2026, 10:33 pm it says smth like {1,0,1,0,0,0,1,0,1,1}
That's one of the things that a line of a rule table can look like, yes.

Read through the tutorial link I sent, and/or the link that NNlk05 sent. If you have more specific questions after you've done that, then ask more specific questions.
how to use the rule
You can use the rule by (in LifeViewer) placing the ruletable after the final ! in the RLE

Code: Select all

x = 0, y = 0, rule = testing_p240591
!
@RULE testing_p240591
Just testing

@TABLE
n_states:2
neighborhood:Moore
symmetries:permute
0, 1,1,1,0,0,0,0,0, 1
1, 0,0,0,0,0,0,0,0, 0
1, 1,0,0,0,0,0,0,0, 0
1, 1,1,1,1,0,0,0,0, 0
1, 1,1,1,1,1,0,0,0, 0
1, 1,1,1,1,1,1,0,0, 0
1, 1,1,1,1,1,1,1,0, 0
1, 1,1,1,1,1,1,1,1, 0

@COLORS
0 0 0 0
1 0 255 255
Feci quod potui, faciant meliora potentes.

Code: Select all

x = 10, y = 3, rule = B34twz/S23
b2o4b2o$obo4bobo$2bo4bo!
[[ AUTOSTART AUTOHIDEGUI TRACK 0 -47/270 ZOOM 4 GPS 45 STEP 3 THEME BOOK ]]
https://nnlk05.github.io

=3
The world is my country, science my religion.
User avatar
Termite
Posts: 187
Joined: August 29th, 2026, 9:16 pm
Location: Earth
Contact:

Re: Thread for basic questions

Post by Termite »

NNlk05 wrote: November 14th, 2026, 11:11 pm
Termite wrote: November 14th, 2026, 10:49 pm
dvgrn wrote: November 14th, 2026, 10:38 pm
That's one of the things that a line of a rule table can look like, yes.

Read through the tutorial link I sent, and/or the link that NNlk05 sent. If you have more specific questions after you've done that, then ask more specific questions.
how to use the rule
You can use the rule by (in LifeViewer) placing the ruletable after the final ! in the RLE

Code: Select all

x = 0, y = 0, rule = testing_p240591
!
@RULE testing_p240591
Just testing

@TABLE
n_states:2
neighborhood:Moore
symmetries:permute
0, 1,1,1,0,0,0,0,0, 1
1, 0,0,0,0,0,0,0,0, 0
1, 1,0,0,0,0,0,0,0, 0
1, 1,1,1,1,0,0,0,0, 0
1, 1,1,1,1,1,0,0,0, 0
1, 1,1,1,1,1,1,0,0, 0
1, 1,1,1,1,1,1,1,0, 0
1, 1,1,1,1,1,1,1,1, 0

@COLORS
0 0 0 0
1 0 255 255

Code: Select all

x=0, y=0, Rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
it only has 2 states
Life is life

termitidae
User avatar
dvgrn
Moderator
Posts: 12063
Joined: May 17th, 2009, 11:00 pm
Location: Madison, WI
Contact:

Re: Thread for basic questions

Post by dvgrn »

Termite wrote: November 14th, 2026, 11:16 pm it only has 2 states
Interesting! That might be a LifeViewer bug that's worth fixing. It's defaulting to plain two-state Life.

It works fine with the "r" in "rule" changed to lowercase:

Code: Select all

x=0, y=0, rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
User avatar
Termite
Posts: 187
Joined: August 29th, 2026, 9:16 pm
Location: Earth
Contact:

Re: Thread for basic questions

Post by Termite »

dvgrn wrote: November 14th, 2026, 11:29 pm
Termite wrote: November 14th, 2026, 11:16 pm it only has 2 states
Interesting! That might be a LifeViewer bug that's worth fixing. It's defaulting to plain two-state Life.

It works fine with the "r" in "rule" changed to lowercase:

Code: Select all

x=0, y=0, rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
yay
now i'll start working on the second rule

how to make range 2 rule like
starting state, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24, ending state
Life is life

termitidae
User avatar
I6_I6
Posts: 1214
Joined: July 26th, 2025, 8:44 pm
Location: Here, there, somewhere, anywhere, everywhere.
Contact:

Re: Thread for basic questions

Post by I6_I6 »

Termite wrote: November 14th, 2026, 11:16 pm
NNlk05 wrote: November 14th, 2026, 11:11 pm
Termite wrote: November 14th, 2026, 10:49 pm

how to use the rule
You can use the rule by (in LifeViewer) placing the ruletable after the final ! in the RLE

Code: Select all

x = 0, y = 0, rule = testing_p240591
!
@RULE testing_p240591
Just testing

@TABLE
n_states:2
neighborhood:Moore
symmetries:permute
0, 1,1,1,0,0,0,0,0, 1
1, 0,0,0,0,0,0,0,0, 0
1, 1,0,0,0,0,0,0,0, 0
1, 1,1,1,1,0,0,0,0, 0
1, 1,1,1,1,1,0,0,0, 0
1, 1,1,1,1,1,1,0,0, 0
1, 1,1,1,1,1,1,1,0, 0
1, 1,1,1,1,1,1,1,1, 0

@COLORS
0 0 0 0
1 0 255 255

Code: Select all

x=0, y=0, Rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
it only has 2 states
I think it could be because the ruletable from NNlk05's quoted post is messing things up. It's probably not a coincidence that the color schemes are the same. The error doesn't happen below, even though changing the "r" to lowercase doesn't affect the ruletable or RLE.
dvgrn wrote: November 14th, 2026, 11:29 pm
Termite wrote: November 14th, 2026, 11:16 pm it only has 2 states
Interesting! That might be a LifeViewer bug that's worth fixing. It's defaulting to plain two-state Life.

It works fine with the "r" in "rule" changed to lowercase:

Code: Select all

x=0, y=0, rule=Rule1
!
@RULE Rule1

@TABLE
n_states:16
neighborhood:Moore
symmetries:permute

var a1 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a2 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a3 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a4 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a5 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a6 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a7 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}
var a8 = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}

0,a1,a2,a3,a4,a5,a6,a7,a8,0
1,a1,a2,a3,a4,a5,a6,a7,a8,2
2,a1,a2,a3,a4,a5,a6,a7,a8,4
3,a1,a2,a3,a4,a5,a6,a7,a8,3
4,a1,a2,a3,a4,a5,a6,a7,a8,8
5,a1,a2,a3,a4,a5,a6,a7,a8,5
6,a1,a2,a3,a4,a5,a6,a7,a8,9
7,a1,a2,a3,a4,a5,a6,a7,a8,11
8,a1,a2,a3,a4,a5,a6,a7,a8,1
9,a1,a2,a3,a4,a5,a6,a7,a8,6
10,a1,a2,a3,a4,a5,a6,a7,a8,10
11,a1,a2,a3,a4,a5,a6,a7,a8,14
12,a1,a2,a3,a4,a5,a6,a7,a8,5
13,a1,a2,a3,a4,a5,a6,a7,a8,7
14,a1,a2,a3,a4,a5,a6,a7,a8,13
15,a1,a2,a3,a4,a5,a6,a7,a8,15

@COLORS
1 255 0 0
2 255 127 0
3 255 255 0
4 128 255 0
5 0 255 0
6 0 255 127
7 0 255 255
8 0 128 255
9 0 0 255
10 127 0 255
11 255 0 255
12 255 0 128
13 255 127 127
14 127 255 127
15 127 127 255
Termite wrote: November 14th, 2026, 11:32 pm [...]
yay
now i'll start working on the second rule

how to make range 2 rule like
starting state, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24, ending state
According to https://github.com/gollygang/ruletabler ... ki/RoadMap, Moore_radius2 isn't supported by Golly or LifeViewer.

Code: Select all

#C [[ THEME Golly ]]
x = 27, y = 15, rule = LifeHistory
8.A$A6.A.A$3A4.BA2B.B2D$3.A4.2B.2B2DB$2.2A2.3B.6B2.3B$2.20B$4.19B$4.2B
C10BD4B$4.2B2C10BD4B$4.B2C11B2D3B$4.13B2D4B$5.12BD3B.B2A$6.13B3.BA.A$
6.3B.B3.B10.A$25.2A!
RuleEdit: A .rule file editing tool
User avatar
Termite
Posts: 187
Joined: August 29th, 2026, 9:16 pm
Location: Earth
Contact:

Re: Thread for basic questions

Post by Termite »

I6_I6 wrote: November 15th, 2026, 2:59 am According to https://github.com/gollygang/ruletabler ... ki/RoadMap, Moore_radius2 isn't supported by Golly or LifeViewer.
Then what does support it?

EDIT by dvgrn: Edited the above quote to take out the very long nested quotes of irrelevant test rule tables -- for readability, please review forum rule 3d and avoid pointlessly super-long quotes.
Life is life

termitidae
User avatar
I6_I6
Posts: 1214
Joined: July 26th, 2025, 8:44 pm
Location: Here, there, somewhere, anywhere, everywhere.
Contact:

Re: Thread for basic questions

Post by I6_I6 »

Termite wrote: November 15th, 2026, 9:23 am
I6_I6 wrote: November 15th, 2026, 2:59 am [...]
According to https://github.com/gollygang/ruletabler ... ki/RoadMap, Moore_radius2 isn't supported by Golly or LifeViewer.
Then what does support it?
Nothing I know of :(

Code: Select all

#C [[ THEME Golly ]]
x = 27, y = 15, rule = LifeHistory
8.A$A6.A.A$3A4.BA2B.B2D$3.A4.2B.2B2DB$2.2A2.3B.6B2.3B$2.20B$4.19B$4.2B
C10BD4B$4.2B2C10BD4B$4.B2C11B2D3B$4.13B2D4B$5.12BD3B.B2A$6.13B3.BA.A$
6.3B.B3.B10.A$25.2A!
RuleEdit: A .rule file editing tool
User avatar
Termite
Posts: 187
Joined: August 29th, 2026, 9:16 pm
Location: Earth
Contact:

Re: Thread for basic questions

Post by Termite »

I6_I6 wrote: November 15th, 2026, 9:24 am
Termite wrote: November 15th, 2026, 9:23 am
I6_I6 wrote: November 15th, 2026, 2:59 am [...]
According to https://github.com/gollygang/ruletabler ... ki/RoadMap, Moore_radius2 isn't supported by Golly or LifeViewer.
Then what does support it?
Nothing I know of :(
Then I have to code an extension myself :x
This will take a while...
Life is life

termitidae
User avatar
MDA
Posts: 364
Joined: June 8th, 2026, 12:18 pm
Location: In Haven (B3-ry4acenqt5eir6-ek/S2-a3-a4nq5aeknr6-ak)
Contact:

Re: Thread for basic questions

Post by MDA »

What is the inserter with the fastest known repeat time?
My website (a database of Life objects, WIP).
GlidINT has been released!
Currently working on a forum system for my website.

Code: Select all

x = 5, y = 17, rule = B3-ry4acenqt5eir6-ek/S2-a3-a4nq5aeknr6-akHistory
C$2C$.2C$2C11$.3D$3.D$2.3D!
[[ STOP 72 ]]
User avatar
I6_I6
Posts: 1214
Joined: July 26th, 2025, 8:44 pm
Location: Here, there, somewhere, anywhere, everywhere.
Contact:

Re: Thread for basic questions

Post by I6_I6 »

In ruletables, is there a simpler way to specify that a state doesn't have a special icon than to add an empty icon in its place?

Code: Select all

#C [[ THEME Golly ]]
x = 27, y = 15, rule = LifeHistory
8.A$A6.A.A$3A4.BA2B.B2D$3.A4.2B.2B2DB$2.2A2.3B.6B2.3B$2.20B$4.19B$4.2B
C10BD4B$4.2B2C10BD4B$4.B2C11B2D3B$4.13B2D4B$5.12BD3B.B2A$6.13B3.BA.A$
6.3B.B3.B10.A$25.2A!
RuleEdit: A .rule file editing tool
User avatar
dvgrn
Moderator
Posts: 12063
Joined: May 17th, 2009, 11:00 pm
Location: Madison, WI
Contact:

Re: Thread for basic questions

Post by dvgrn »

MDA wrote: November 15th, 2026, 10:21 am What is the inserter with the fastest known repeat time?
Stable or periodic inserter? Inserting what type of signal into what kind of stream? Does the inserter need to insert the signal in front of existing signals, or just behind previous signals as quickly as possible?

For stable circuitry, variants of RNE-19T84 are still pretty good -- repeat time technically 35 according to the wiki page, but in practice generally more than that because it's hard to feed in inputs at that speed.
User avatar
MDA
Posts: 364
Joined: June 8th, 2026, 12:18 pm
Location: In Haven (B3-ry4acenqt5eir6-ek/S2-a3-a4nq5aeknr6-ak)
Contact:

Re: Thread for basic questions

Post by MDA »

dvgrn wrote: November 15th, 2026, 10:14 pm […]

Stable or periodic inserter? Inserting what type of signal into what kind of stream? Does the inserter need to insert the signal in front of existing signals, or just behind previous signals as quickly as possible?

For stable circuitry, variants of RNE-19T84 are still pretty good -- repeat time technically 35 according to the wiki page, but in practice generally more than that because it's hard to feed in inputs at that speed.
I mean inserters like Fx119 or NW31 (but faster), where the end of the inserter (to the left of the glider in the image for RNE-19T84) is unobstructed.
My website (a database of Life objects, WIP).
GlidINT has been released!
Currently working on a forum system for my website.

Code: Select all

x = 5, y = 17, rule = B3-ry4acenqt5eir6-ek/S2-a3-a4nq5aeknr6-akHistory
C$2C$.2C$2C11$.3D$3.D$2.3D!
[[ STOP 72 ]]
User avatar
Entity Valkyrie 2
Posts: 2144
Joined: February 26th, 2019, 7:13 pm
Contact:

Re: Thread for basic questions

Post by Entity Valkyrie 2 »

MDA wrote: November 16th, 2026, 2:20 am
dvgrn wrote: November 15th, 2026, 10:14 pm […]

Stable or periodic inserter? Inserting what type of signal into what kind of stream? Does the inserter need to insert the signal in front of existing signals, or just behind previous signals as quickly as possible?

For stable circuitry, variants of RNE-19T84 are still pretty good -- repeat time technically 35 according to the wiki page, but in practice generally more than that because it's hard to feed in inputs at that speed.
I mean inserters like Fx119 or NW31 (but faster), where the end of the inserter (to the left of the glider in the image for RNE-19T84) is unobstructed.
At the moment it is probably SE23 (which is not on the wiki for some reason), which has a repeat time of 34 ignoring FNG, or 57 with eater 5:

Code: Select all

x = 41, y = 21, rule = StateInvestigator
19.2A$19.A.A2.2A$16.A4.A3.A$3.A12.5A.3A$.3A16.A.A$A15.3A.A.A$2A13.A2.
A.2A$15.2A3$.2A$A2.A$A4.A14.A$.6A13.A.A$4.A.2A12.3A14.2A$4.A.A15.A9.
2A3.A$4.2A26.A.A3.3A$26.Q3.A.A.4A2.A$20.C4.DE3.2A5.A$23.EDE10.A$36.2A
!

Code: Select all

x = 42, y = 27, rule = B3/S23
20b2o$20bobo2b2o$17bo4bo3bo$4bo12b5ob3o$2b3o16bobo$bo15b3obobo$b2o13bo
2bob2o$16b2o5$3o2bo15bo$obo2bo15bobo$o3bo16b3o14b2o$b2o20bo9b2o3bo$bo
31bobo3b3o$31bobob4o2bo$31b2o5bo$19bo3b2o12bo$18bobo3bo12b2o$18b2o3bo$
22bo$18b5obo$18bo4bobo$20bo2bobo$19b2o3bo!
Bx222 IS MY WORST ENEMY.

HyperConway — explore cellular automata on HyperRogue's hyperbolic tiling

Creator of the rule StateInvestigator
Please click here for my own pages (and oscillator stamp collections)
Post Reply