This issue occurs in Chrome 120.0.6099.144 on Android 14.rowett wrote: December 26th, 2023, 3:20 pm Please let me know which version of Android you are running. There haven't been any significant changes to LifeViewer recently.
Fixed, thanks. LifeViewer treats the off version of on-off [R]Investigator pairs as a dead cell during Identify.b-engine wrote: December 25th, 2023, 7:09 am LifeViewer identifies that 1-cell on-off has both active rotor cells, volatility, temperature and heat of 0 (which is impossible for any oscillator) even through it's period and mod is 2.Code: Select all
x = 1, y = 1, rule = B3/S23Investigator J!
Another bug: Strict voltility and voltility should be 1, as there is 1 cell that oscillates at that period. Heat should be 1, and temp should be 1.rowett wrote: January 5th, 2024, 4:36 pmFixed, thanks. LifeViewer treats the off version of on-off [R]Investigator pairs as a dead cell during Identify.b-engine wrote: December 25th, 2023, 7:09 am LifeViewer identifies that 1-cell on-off has both active rotor cells, volatility, temperature and heat of 0 (which is impossible for any oscillator) even through it's period and mod is 2.Code: Select all
x = 1, y = 1, rule = B3/S23Investigator J!
They are. You need to hard refresh your browser to ensure you have the latest build (1098).Haycat2009 wrote: January 6th, 2024, 1:22 am Another bug: Strict voltility and voltility should be 1, as there is 1 cell that oscillates at that period. Heat should be 1, and temp should be 1.
Code: Select all
x = 5, y = 4, rule = R3,C2,S5-9,B7-9,N#
b3o$2b2o$5o$b2obo!
Code: Select all
x = 6, y = 7, rule = Symbiosis
2.A$3.A$.A2.AB$.2A.A$A2.B$.2A$.B!
I don't see a bug. Ctrl+Space means advance selection after which use Enter to paste or Esc to remove.
On my system it shows min population as 13:b-engine wrote: January 17th, 2024, 1:38 am Lifeviewer identifies that the oscillator has minpop of 14, but it's minpop is actually 13.
Yes that's expected. When you do Ctrl+Space it advances cells in the selection only which is shown as an overlay.
If you're using Safari then this bug may have been fixed in build 1100.Haycat2009 wrote: January 23rd, 2024, 11:24 pm Bug:
1. Copy this text
2. Use the Copy all clipboard function on mobile
3. You do not get the rle, but this text.
It's meant to.AlbertArmStain wrote: January 24th, 2024, 4:43 pm Here's something like a bug:
if you move your mouse up, the "y" position in the bottom left hand corner goes down (at least on lazyslug.com)
Even on Safari it does not work.rowett wrote: January 24th, 2024, 8:00 amIf you're using Safari then this bug may have been fixed in build 1100.Haycat2009 wrote: January 23rd, 2024, 11:24 pm Bug:
1. Copy this text
2. Use the Copy all clipboard function on mobile
3. You do not get the rle, but this text.
I'd love to know if it's just me and my Pixel 6a having this... it's definitely intrusive to Lifeviewing and it's still happening for me.rowett wrote: December 26th, 2023, 3:20 pmAnyone else on Android experiencing this issue?azulavoir wrote: December 25th, 2023, 10:25 pm https://youtu.be/ANu9crNiq2M
I don't know if it's the most recent android or what but Lifeviewer is extremely flickery and barely functional on mobile for me.
I can't reproduce this. I've tested on both iOS and Android and it works for me. Anyone else seeing this issue?
This bug appears again. The infobox displays that the minpop is 30, but the identifier says that the minpop is 29.
The infobox is showing the current population (not the minimum).b-engine wrote: February 2nd, 2024, 3:19 am The infobox displays that the minpop is 30, but the identifier says that the minpop is 29.
But you can see that the current population value on the graph is the lowest.rowett wrote: February 2nd, 2024, 4:08 am The infobox is showing the current population (not the minimum).
This is only true when the number of generations T is greater than the horizontal resolution of the graph.b-engine wrote: February 2nd, 2024, 4:11 am the graph is slightly off-phase - it displays the latest population few generations before instead of current generation.
Code: Select all
x = 0, y = 0, rule = Symbiosis|HighAndLowLife
!
@RULE Symbiosis
https://conwaylife.com/forums/viewtopic.php?p=21425#p46301
@TREE
num_states=3
num_neighbors=8
num_nodes=64
1 0 0 0
1 0 0 2
1 0 1 0
2 0 1 2
1 0 1 2
2 1 4 4
2 2 4 4
3 3 5 6
1 1 1 2
2 4 8 4
2 4 4 4
3 5 9 10
1 2 1 2
2 4 4 12
3 6 10 13
4 7 11 14
2 8 1 4
3 9 16 10
3 10 10 10
4 11 17 18
2 12 4 2
3 13 10 20
4 14 18 21
5 15 19 22
2 1 1 4
3 16 24 10
4 17 25 18
4 18 18 18
5 19 26 27
2 2 4 2
3 20 10 29
4 21 18 30
5 22 27 31
6 23 28 32
3 24 24 10
4 25 34 18
5 26 35 27
5 27 27 27
6 28 36 37
3 29 10 29
4 30 18 39
5 31 27 40
6 32 37 41
7 33 38 42
4 34 34 18
5 35 44 27
6 36 45 37
6 37 37 37
7 38 46 47
4 39 18 39
5 40 27 49
6 41 37 50
7 42 47 51
8 43 48 52
5 44 44 27
6 45 54 37
7 46 55 47
7 47 47 47
8 48 56 57
5 49 27 49
6 50 37 59
7 51 47 60
8 52 57 61
9 53 58 62
@TABLE
n_states:3
neighborhood:Moore
symmetries:permute
1,0,0,0,0,0,0,0,0,0
1,1,0,0,0,0,0,0,0,0
0,1,1,1,0,0,0,0,0,1
1,1,1,1,1,0,0,0,0,0
1,1,1,1,1,1,0,0,0,0
1,1,1,1,1,1,1,0,0,0
1,1,1,1,1,1,1,1,0,0
1,1,1,1,1,1,1,1,1,0
2,0,0,0,0,0,0,0,0,0
2,2,0,0,0,0,0,0,0,0
0,2,2,2,0,0,0,0,0,2
2,2,2,2,2,0,0,0,0,0
2,2,2,2,2,2,0,0,0,0
2,2,2,2,2,2,2,0,0,0
2,2,2,2,2,2,2,2,0,0
2,2,2,2,2,2,2,2,2,0
@RULE HighAndLowLife
https://conwaylife.com/forums/viewtopic.php?f=11&t=6196
https://conwaylife.com/forums/viewtopic.php?p=169699#p169699
@COLORS
0 0 0 0
1 0 128 128
2 0 255 255
@TABLE
n_states:3
neighborhood:Moore
symmetries:permute
var a1 = {0, 1, 2}
var a2 = {0, 1, 2}
var a3 = {0, 1, 2}
var a4 = {0, 1, 2}
var a5 = {0, 1, 2}
var a6 = {0, 1, 2}
var a7 = {0, 1, 2}
var a8 = {0, 1, 2}
var b = {0, 1}
var c = {0, 2}
var d = {1, 2}
1, 1, 1, 0, 0, 0, 0, 0, 0, 1
1, 2, 0, 0, 0, 0, 0, 0, 0, 1
b, 1, 1, 1, 0, 0, 0, 0, 0, 1
b, 1, 2, 0, 0, 0, 0, 0, 0, 1
2, 1, 1, 1, 1, 0, 0, 0, 0, 2
2, 1, 1, 2, 0, 0, 0, 0, 0, 2
2, 2, 2, 0, 0, 0, 0, 0, 0, 2
2, 1, 1, 1, 1, 1, 0, 0, 0, 2
2, 1, 1, 1, 2, 0, 0, 0, 0, 2
2, 2, 2, 1, 0, 0, 0, 0, 0, 2
c, 1, 1, 1, 1, 1, 1, 0, 0, 2
c, 1, 1, 1, 1, 2, 0, 0, 0, 2
c, 1, 1, 2, 2, 0, 0, 0, 0, 2
c, 2, 2, 2, 0, 0, 0, 0, 0, 2
2, 1, 1, 1, 1, 1, 1, 1, 0, 2
2, 1, 1, 1, 1, 1, 2, 0, 0, 2
2, 1, 1, 1, 2, 2, 0, 0, 0, 2
2, 1, 2, 2, 2, 0, 0, 0, 0, 2
d, a1, a2, a3, a4, a5, a6, a7, a8, 0
Code: Select all
x = 0, y = 0, rule = HighAndLowLife|Symbiosis
!
@RULE HighAndLowLife
https://conwaylife.com/forums/viewtopic.php?f=11&t=6196
https://conwaylife.com/forums/viewtopic.php?p=169699#p169699
@COLORS
0 0 0 0
1 0 128 128
2 0 255 255
@TABLE
n_states:3
neighborhood:Moore
symmetries:permute
var a1 = {0, 1, 2}
var a2 = {0, 1, 2}
var a3 = {0, 1, 2}
var a4 = {0, 1, 2}
var a5 = {0, 1, 2}
var a6 = {0, 1, 2}
var a7 = {0, 1, 2}
var a8 = {0, 1, 2}
var b = {0, 1}
var c = {0, 2}
var d = {1, 2}
1, 1, 1, 0, 0, 0, 0, 0, 0, 1
1, 2, 0, 0, 0, 0, 0, 0, 0, 1
b, 1, 1, 1, 0, 0, 0, 0, 0, 1
b, 1, 2, 0, 0, 0, 0, 0, 0, 1
2, 1, 1, 1, 1, 0, 0, 0, 0, 2
2, 1, 1, 2, 0, 0, 0, 0, 0, 2
2, 2, 2, 0, 0, 0, 0, 0, 0, 2
2, 1, 1, 1, 1, 1, 0, 0, 0, 2
2, 1, 1, 1, 2, 0, 0, 0, 0, 2
2, 2, 2, 1, 0, 0, 0, 0, 0, 2
c, 1, 1, 1, 1, 1, 1, 0, 0, 2
c, 1, 1, 1, 1, 2, 0, 0, 0, 2
c, 1, 1, 2, 2, 0, 0, 0, 0, 2
c, 2, 2, 2, 0, 0, 0, 0, 0, 2
2, 1, 1, 1, 1, 1, 1, 1, 0, 2
2, 1, 1, 1, 1, 1, 2, 0, 0, 2
2, 1, 1, 1, 2, 2, 0, 0, 0, 2
2, 1, 2, 2, 2, 0, 0, 0, 0, 2
d, a1, a2, a3, a4, a5, a6, a7, a8, 0
@RULE Symbiosis
https://conwaylife.com/forums/viewtopic.php?p=21425#p46301
@TREE
num_states=3
num_neighbors=8
num_nodes=64
1 0 0 0
1 0 0 2
1 0 1 0
2 0 1 2
1 0 1 2
2 1 4 4
2 2 4 4
3 3 5 6
1 1 1 2
2 4 8 4
2 4 4 4
3 5 9 10
1 2 1 2
2 4 4 12
3 6 10 13
4 7 11 14
2 8 1 4
3 9 16 10
3 10 10 10
4 11 17 18
2 12 4 2
3 13 10 20
4 14 18 21
5 15 19 22
2 1 1 4
3 16 24 10
4 17 25 18
4 18 18 18
5 19 26 27
2 2 4 2
3 20 10 29
4 21 18 30
5 22 27 31
6 23 28 32
3 24 24 10
4 25 34 18
5 26 35 27
5 27 27 27
6 28 36 37
3 29 10 29
4 30 18 39
5 31 27 40
6 32 37 41
7 33 38 42
4 34 34 18
5 35 44 27
6 36 45 37
6 37 37 37
7 38 46 47
4 39 18 39
5 40 27 49
6 41 37 50
7 42 47 51
8 43 48 52
5 44 44 27
6 45 54 37
7 46 55 47
7 47 47 47
8 48 56 57
5 49 27 49
6 50 37 59
7 51 47 60
8 52 57 61
9 53 58 62
@TABLE
n_states:3
neighborhood:Moore
symmetries:permute
1,0,0,0,0,0,0,0,0,0
1,1,0,0,0,0,0,0,0,0
0,1,1,1,0,0,0,0,0,1
1,1,1,1,1,0,0,0,0,0
1,1,1,1,1,1,0,0,0,0
1,1,1,1,1,1,1,0,0,0
1,1,1,1,1,1,1,1,0,0
1,1,1,1,1,1,1,1,1,0
2,0,0,0,0,0,0,0,0,0
2,2,0,0,0,0,0,0,0,0
0,2,2,2,0,0,0,0,0,2
2,2,2,2,2,0,0,0,0,0
2,2,2,2,2,2,0,0,0,0
2,2,2,2,2,2,2,0,0,0
2,2,2,2,2,2,2,2,0,0
2,2,2,2,2,2,2,2,2,0
LifeViewer does not support alternating rules where either of the rules is a RuleLoader (@TABLE or @TREE) rule.azulavoir wrote: February 7th, 2024, 5:58 pm I'm not sure if this is a bug or what it is, but.... Whatever's going on here.
Code: Select all
x = 74, y = 74, rule = B3/S23
37bo$37b3o$40bo$39b2o13b2o$54bo$52bobo$52b2o2$43bo$42bobo$42bobo$42b2o3$31bo$
30bo8b2o$17bo12b3o7bo$17b3o17b3o17b2o$20bo16bo19bo$3bo15b2o34bobo$3b3o42bo6b
2o$6bo39b2ob2o$5b2o39b2ob2o$46b2o2bo$23bo17b2o5b2o$21b2obo6b2o7bobo$21bo2bo6b
2o7bo$21b3o15b2o3$8bobo46b3o$7bo2bo37b2o7bo$9b2o13b2o22b2o8bo$24bo$2b2o11b2o
8b3o$bobo11bobo9bo$bo15bo37b2o15b2o$2o15b2o37bo15bo$46bo9bobo11bobo$46b3o8b2o
11b2o$49bo$15bo8b2o22b2o13b2o$16bo7b2o37bo2bo$14b3o46bobo3$33b2o15b3o$33bo7b
2o6bo2bo$31bobo7b2o6bob2o$24b2o5b2o17bo$23bo2b2o$23b2ob2o39b2o$23b2ob2o39bo$
17b2o6bo42b3o$16bobo34b2o15bo$16bo19bo16bo$15b2o17b3o17b3o$33bo7b3o12bo$33b2o
8bo$42bo3$30b2o$29bobo$29bobo$30bo2$20b2o$19bobo$19bo$18b2o13b2o$33bo$34b3o$
36bo!
It's because the T Min/Max values are an offset from the generation that the oscillator was detected. If you look a few lines further down in Help>Info>Identify you'll see "Generation 37 and 78". This means the oscillator was detected from generations 37 to 78 (hence period 41). The T Min value is 3 generations from the beginning (i.e. 37 + 3 = 40) and the T Max value is 14 generations from the beginning (i.e. 37 + 14 = 51).confocaloid wrote: February 10th, 2024, 6:20 pm Identifying this oscillator (Pattern/Identify) shows that the minimum population is 246 and the maximum population is 476. After that, the section "Identify" in Help/Info says: "T Min/Max 246@T3 476@T14". However, generation 3 of the above pattern has population 270 (instead of expected 246), and generation 14 has population 436 (instead of expected 476).
Code: Select all
<!DOCTYPE html>
<html>
<head>
<meta name="LifeViewer" content="viewer textarea"> <!--required tag-->
<script src="lv-plugin.js"></script> <!--assumes plug-in is in the same directory as html file-->
<script>
function showkey(e) {
document.getElementById("disp").textContent += " " + e.code ;
}
window.onload = function() {
document.getElementById("bubblediv").addEventListener("keydown", showkey);
}
</script>
</head>
<body>
<!--viewer container-->
<div id="bubblediv">
<div class="viewer"> <!--class=viewer is required-->
<textarea>bo$2bo$3o!</textarea><br/> <!--textarea required in viewer container, with glider rle-->
<canvas></canvas> <!--canvas required in viewer container-->
</div>
</div>
<!--end viewer container-->
<div id="disp"></div>
</body>
</html>