Page 5 of 14
Re: Still-life 'factories'
Posted: September 8th, 2022, 2:16 am
by Kazyan
Another G->block:
Code: Select all
x = 21, y = 24, rule = B3/S23
17bo$16bobo$16bobo$15b2ob2o2$bo13b2ob2o$2bo12b2obo$3o17bo$12bo6b2o$11b
obo$10bo2bo2b2o$11b2o3b2o5$5b2ob2o$4bobobobo$4bobo3b3o$2b3obobo4bo$bo
3bob2ob3o$b2o2bo4bo$6b3o$8b2o!
Re: Still-life 'factories'
Posted: October 5th, 2022, 7:14 pm
by Wyirm
Can't find many edgy boat
EDIT by dvgrn: ship factories, so here's an engineered one that I can't find anywhere in this thread:
Code: Select all
x = 38, y = 65, rule = LifeSuper
4.2A.A$4.A.2A2$5.5A$2A2.A4.A$A2.A.BAB$.A.A.2AB$2A.A.4BA$3.A3.BABA$3.
2A2.A2BA$8.2A3B$10.7B$10.9B$10.10B$10.11B$6.14B$6.14B$5.16B$5.17B$5.
11B2A4B$6.10B2A9B$6.24B$6.25B$7.24B$8.24B$7.26B$8.26B$6.29B$6.2A.21B
2A4B$7.A3.18BA2BA3B$4.3A5.9B.8B2A4B$4.A7.8B3.4B2.6B$14.5B5.4B2.B$14.
6B2.7B$14.16B$15.2B.13B$13.4B2.14B$13.2A3.16B$14.A3.17B$11.3A4.17B$
11.A7.17B$12.2A5.17B$13.A5.18B$13.A.AB3.18B$14.2AB.19B$16.21B$16.20B$
17.19B$16.20B$14.22B$12.23B2D$12.2BE19BDBDB$11.3BEBE17B2DB$12.2B3E4B.
13B$11.5BE4B2.12B$10.10B2.9B.2B$9.4B9.11B$9.3B9.13B$7.4B10.13B$7.2A
11.13B$8.A10.14B$5.3A11.13B$5.A13.13B$19.13B$20.11B!
Re: Still-life 'factories'
Posted: October 5th, 2022, 8:38 pm
by Entity Valkyrie 2
Wyirm wrote: October 5th, 2022, 7:14 pm
Can't find many edgy boat
EDIT by dvgrn: ship factories, so here's an engineered one that I can't find anywhere in this thread:
Code: Select all
x = 38, y = 65, rule = LifeSuper
4.2A.A$4.A.2A2$5.5A$2A2.A4.A$A2.A.BAB$.A.A.2AB$2A.A.4BA$3.A3.BABA$3.
2A2.A2BA$8.2A3B$10.7B$10.9B$10.10B$10.11B$6.14B$6.14B$5.16B$5.17B$5.
11B2A4B$6.10B2A9B$6.24B$6.25B$7.24B$8.24B$7.26B$8.26B$6.29B$6.2A.21B
2A4B$7.A3.18BA2BA3B$4.3A5.9B.8B2A4B$4.A7.8B3.4B2.6B$14.5B5.4B2.B$14.
6B2.7B$14.16B$15.2B.13B$13.4B2.14B$13.2A3.16B$14.A3.17B$11.3A4.17B$
11.A7.17B$12.2A5.17B$13.A5.18B$13.A.AB3.18B$14.2AB.19B$16.21B$16.20B$
17.19B$16.20B$14.22B$12.23B2D$12.2BE19BDBDB$11.3BEBE17B2DB$12.2B3E4B.
13B$11.5BE4B2.12B$10.10B2.9B.2B$9.4B9.11B$9.3B9.13B$7.4B10.13B$7.2A
11.13B$8.A10.14B$5.3A11.13B$5.A13.13B$19.13B$20.11B!
I believe I have posted this somewhere, but I couldn't find it anymore.
Here is another H-to-ship that I have posted in this thread:
Code: Select all
x = 21, y = 31, rule = B3/S23
14b2o$14b2o5$2o$bo$bobo$2b2o3$14bo$14bob2o$16bobo$17b2o$2bo$2bobo$2b3o
$4bo$19b2o$19b2o6$10b2o$11bo$8b3o$8bo!
Re: Still-life 'factories'
Posted: October 5th, 2022, 9:50 pm
by EvinZL
Here is a higher clearance H-to-ship
Code: Select all
x = 52, y = 59, rule = LifeHistory
25.4B$26.4B$27.4B$28.4B$29.4B$30.4B$31.4B$32.4B$33.4B$34.4B$35.4B$36.
4B$37.4B$38.4B$36.7B$20.C14.8B$18.3C13.10B$17.C16.13B$17.2C13.16B$15.
4B13.17B$14.3B15.17B$14.4B15.17B$13.5B8.2A5.17B$13.6B8.A5.18B$2.7B2.
8B8.A.AB3.18B$.4BC14B8.2AB.19B$.2B3C13B11.21B$3BCBC4B.7B12.20B$.2BC
15B12.19B$.18B11.20B$3.17B8.22B$5.15B.2B2.24B2D$6.22BD19BDBDB$6.8B.
13BDBD17B2DB$4.8B3.2B2C9B3D4B.13B$4.2C3.B5.2B2C11BD4B2.12B$5.C10.18B
2.9B.2B$2.3C12.B.3B.4B9.11B$2.C4.A.A12.4B9.13B$6.A.2A11.4B10.13B$6.A
13.4B10.13B$2.A.2A.3A9.4B10.14B$2.2A.A.A2.A7.4B3.2A6.13B$6.3B2AB5.4B
4.A7.13B$8.4B4.5B.BA.A7.13B$10.11B.B2A9.11B$9.2BA11B$9.BABA10B$9.A2BA
9B$9.B2A10B$9.13B$7.2AB.10B.2A$6.A.AB3.8B.A$6.A4.5B3.2A.A$5.2A4.2A6.
2ABA.2A$12.A7.B2.A.A$9.3A3.2A.A.2A.A$9.A5.A.2A.A2.A$21.2A!
Re: Still-life 'factories'
Posted: October 5th, 2022, 10:55 pm
by dvgrn
EvinZL wrote: October 5th, 2022, 9:50 pm
Here is a higher clearance H-to-ship...
Nice -- another good use for simeks' same-lane 180-degree reflector.
This triggered a very old memory -- a
three-digit post number memory -- because a ship is one of the possible targets for two gliders, to build an LWSS (or MWSS, if you delay the lower glider by one tick (on the right side of that old pre-syringe pre-Snark template pattern).
Nowadays we could just bounce two gliders into position with Snarks, and maybe a Bandersnatch or two -- should be a reasonably small piece of circuitry, because the ship creation doesn't have to be synchronized precisely with the gliders.
Re: Still-life 'factories'
Posted: October 7th, 2022, 12:57 am
by Entity Valkyrie 2
dvgrn wrote: October 5th, 2022, 10:55 pm
EvinZL wrote: October 5th, 2022, 9:50 pm
Here is a higher clearance H-to-ship...
Nice -- another good use for simeks' same-lane 180-degree reflector.
This triggered a very old memory -- a
three-digit post number memory -- because a ship is one of the possible targets for two gliders, to build an LWSS (or MWSS, if you delay the lower glider by one tick (on the right side of that old pre-syringe pre-Snark template pattern).
Nowadays we could just bounce two gliders into position with Snarks, and maybe a Bandersnatch or two -- should be a reasonably small piece of circuitry, because the ship creation doesn't have to be synchronized precisely with the gliders.
By the way, the same-lane reflector can also slightly speed up this H-to-LWSS, though it doesn't exactly solve the clearance problem.
Code: Select all
x = 75, y = 104, rule = B3/S23
40b2o$40bo$41bo$28bo11b2o$28b3o11b2o$31bo8b2o2bo$30b2o9bobo$25b2o7bo4b
obob2o$26bo6bobo3b2o$26bobo4bo2bo$27b2o5b2o3$25b2o$26bo$25bo$25b2o$28b
2o$25b2ob2o$24bobo$24bo3b4o$25b3o3bo5b2o$28bo8bo$27b2o9b3o$40bo5$66bo$
64b3o$63bo$63b2o16$72b2o$72b2o5$46bo26bo$46bobo23bobo$46b3o24bo$48bo8$
51b2o$51bo$52bo$49b3o$49bo2b3o$50bo2bo$48bob2o3bo$46b3o5b2o$45bo4b2o$
46b3obo$48bobo$49bo3$16bo$3b2o9b3o$4bo8bo$b3o3bo5b2o$o3b4o$obo$b2ob2o$
4b2o$b2o$bo$2bo$b2o3$3b2o5b2o$2bobo4bo2bo$2bo6bobo3b2o$b2o7bo4bobob2o$
6b2o9bobo$7bo8b2o2bo$4b3o11b2o$4bo11b2o$17bo$16bo$16b2o!
Re: Still-life 'factories'
Posted: November 15th, 2022, 9:28 am
by Jormungant
I just managed to make this h-to-boat a toggle:
Code: Select all
x = 152, y = 64, rule = LifeHistory
6$31.2A94.2A$31.A95.A$28.A4.A2.2A86.A4.A2.2A$28.5A.A2.A86.5A.A2.A$14.
2A16.B.2A.A.2A69.2A16.B.2A.A.2A$15.A10.4AB3AB2.A2.A70.A10.4AB3AB2.A2.
A$15.A.AB7.A2.A.A3B2A.A72.A.AB7.A2.A.A3B2A.A$16.2AB.3B4.7B2.A.2A72.2A
B.3B4.7B2.A.2A$18.7B3.7B.A77.7B3.7B.A$18.16B.2A77.16B.2A$19.15B81.15B
$18.16B80.16B$16.18B78.18B$14.19B77.19B$14.2BC15B3.2A73.2BC15B3.2A$
13.3BCBC4B.7B5.A72.3BCBC4B.7B5.A$14.2B3C4B2.7B4.A.2A70.2B3C4B2.7B4.A.
2A$13.5BC4B2.8B4.A.A69.5BC4B2.8B4.A.A$12.10B4.7B5.B69.10B4.7B5.B$11.
4B10.8B2.B.3B67.4B10.8B2.B.3B$11.3B11.8B.7B66.3B11.8B.7B$9.4B12.17B
63.4B12.17B$9.2A14.18B62.2A14.18B$10.A13.20B62.A13.20B$7.3A15.19B59.
3A15.19B$7.A17.20B58.A17.20B$23.24B72.24B$21.27B69.27B$21.26B70.26B$
20.2A25B69.2A25B$20.2AB.24B5.2A61.2AB.24B$21.B2.24B5.2A62.B2.24B$16.
2A5.14BC10B64.2A5.14BD10B$17.A6.12BCBC9B65.A6.12BDBD9B$17.A.AB.15B2C
9B65.A.AB.15B2D9B$18.2AB.26B66.2AB.26B$19.27B69.27B$20.26B70.26B$20.
27B69.27B$22.25B71.25B$22.24B2A70.24B2A$25.21B2A73.21B2A$25.19B2.B74.
19B2.B$26.11B.5B79.11B.5B$26.6B.4B2.2B81.6B.4B2.2B$26.6B2.2B86.6B2.2B
$26.4B92.4B$26.5B91.5B$27.2B.B2A90.2B.B2A$30.BA.A92.BA.A$33.A95.A$33.
2A94.2A!
It does not interfere with *any* of the three reflection allowed ^^
Code: Select all
x = 245, y = 80, rule = LifeHistory
13$32.2A94.2A78.2A$32.A95.A79.A$29.A4.A2.2A86.A4.A2.2A70.A4.A2.2A$29.
5A.A2.A86.5A.A2.A70.5A.A2.A$15.2A16.B.2A.A.2A69.2A16.B.2A.A.2A53.2A
16.B.2A.A.2A$16.A10.4AB3AB2.A2.A70.A10.4AB3AB2.A2.A54.A10.4AB3AB2.A2.
A$16.A.AB7.A2.A.A3B2A.A72.A.AB7.A2.A.A3B2A.A56.A.AB7.A2.A.A3B2A.A$17.
2AB.3B4.7B2.A.2A72.2AB.3B4.7B2.A.2A56.2AB.3B4.7B2.A.2A$19.7B3.7B.A77.
7B3.7B.A61.7B3.7B.A$19.16B.2A77.16B.2A61.16B.2A$20.15B81.15B65.15B$
19.16B80.16B58.C5.16B$17.18B78.18B56.C.C3.18B$15.19B77.19B58.2C.19B$
15.2BD15B3.2A73.2BD15B3.2A19.C37.2BD15B3.2A$14.3BDBD4B.7B5.A72.3BDBD
4B.7B5.A19.C.C34.3BDBD4B.7B5.A$15.2B3D4B2.7B4.A.2A70.2B3D4B2.7B4.A.2A
16.2C36.2B3D4B2.7B4.A.2A$14.5BD4B2.8B4.A.A69.5BD4B2.8B4.A.A53.5BD4B2.
8B4.A.A$13.10B4.7B5.B69.10B4.7B5.B53.10B4.7B5.B$12.4B10.8B2.B.3B67.4B
10.8B2.B.3B51.4B10.8B2.B.3B$12.3B11.8B.7B66.3B11.8B.7B50.3B11.8B.7B$
10.4B12.17B63.4B12.17B47.4B12.17B$10.2A14.18B62.2A14.18B46.2A14.18B$
11.A13.20B62.A13.20B46.A13.20B$8.3A15.19B59.3A15.19B43.3A15.19B$8.A
17.20B58.A17.20B42.A17.20B$24.24B72.24B56.24B$22.27B69.27B53.27B$22.
26B70.26B54.26B$21.2A25B69.2A25B53.2A25B$21.2AB.24B5.2A61.2AB.24B5.2A
45.2AB.24B5.2A$22.B2.24B5.2A62.B2.24B5.2A46.B2.24B5.2A$17.2A5.14BC10B
64.2A5.14BC10B48.2A5.14BC10B$18.A6.12BCBC9B65.A6.12BCBC9B49.A6.12BCBC
9B$18.A.AB.15B2C9B65.A.AB.15B2C9B49.A.AB.15B2C9B$19.2AB.26B66.2AB.26B
50.2AB.26B$20.27B69.27B53.27B$21.26B70.26B54.26B$21.27B69.27B53.27B$
23.25B71.25B55.25B$23.24B2A70.24B2A54.24B2A$26.21B2A73.21B2A57.21B2A$
26.19B2.B74.19B2.B58.19B2.B$27.11B.5B79.11B.5B63.11B.5B$27.6B.4B2.2B
81.6B.4B2.2B65.6B.4B2.2B$27.6B2.2B86.6B2.2B70.6B2.2B$27.4B92.4B76.4B$
27.5B91.5B75.5B$28.2B.B2A90.2B.B2A74.2B.B2A$31.BA.A92.BA.A76.BA.A$34.
A95.A79.A$34.2A94.2A78.2A$19.3C$21.C$20.C!
There seem to be a way to get a glider out, but did not manage to stabilize it without blocking paths fully, a preview of what I mean would be:
Code: Select all
x = 47, y = 46, rule = LifeHistory
5$29.2A$29.A$26.A4.A2.2A$26.5A.A2.A$12.2A16.B.2A.A.2A$13.A10.4AB3AB2.
A2.A$13.A.AB7.A2.A.A3B2A.A$14.2AB.3B4.7B2.A.2A$16.7B3.7B.A$16.16B.2A$
17.15B$16.16B$14.18B$12.19B$12.2BC15B3.2A$11.3BCBC4B.7B5.A$12.2B3C4B
2.7B4.A.2A$11.5BC4B2.8B4.A.A$10.10B4.7B5.B$9.4B10.8B2.B.3B$9.3B11.8B.
7B$7.4B12.17B$7.2A14.18B$8.A13.20B$5.3A15.19B$5.A17.19B$24.17B$25.13B
$29.10B$29.10B$28.12B$29.11B$30.5BC4B2.B$26.2C2.4BCBC7B$25.C.C2.5B2C$
25.C4.6B$24.2C5.4B$33.B!
Re: Still-life 'factories'
Posted: November 30th, 2022, 1:47 pm
by Jormungant
H-to-hive:
Code: Select all
x = 171, y = 52, rule = LifeHistory
14$81.C$79.2C20.4B26.2A$80.2C20.4B25.A$103.4B21.A4.A2.2A$104.4B20.5A.
A2.A$105.4B5.2A16.B.2A.A.2A$9.4B26.2A65.4B5.A10.4AB3AB2.A2.A$10.4B25.
A67.4B4.A.AB7.A2.A.A3B2A.A25.C$11.4B21.A4.A2.2A62.4B4.2AB.3B4.7B2.A.
2A23.C$12.4B20.5A.A2.A63.4B5.7B3.7B.A26.3C$13.4B5.2A16.B.2A.A.2A61.4B
4.16B.2A$14.4B5.A10.4AB3AB2.A2.A62.4B4.15B$15.4B4.A.AB7.A2.A.A3B2A.A
65.4B2.16B$16.4B4.2AB.3B4.7B2.A.2A65.21B$17.4B5.7B3.7B.A69.19B$18.4B
4.16B.2A69.2BC15B$19.4B4.15B71.3BCBC4B.7B$20.4B2.16B72.2B3C4B2.7B$21.
21B71.5BC4B2.8B$22.19B71.11B3.7B$22.2BC15B71.4B5.4B.8B8.2C$21.3BCBC4B
.7B72.3B7.7B.4B4.B.B.C$22.2B3C4B2.7B69.4B9.6B3.4B4.C.C$21.5BC4B2.8B
68.2A12.4B4.5B.2B2C$20.11B3.7B69.A13.2B$19.4B5.4B.8B8.2C56.3A26.D$19.
3B7.7B.4B4.B.B.C57.A27.D.D$17.4B9.6B3.4B4.C.C85.D.D$17.2A12.4B4.5B.2B
2C87.D$18.A13.2B$15.3A26.D90.2C$15.A27.D.D89.2C$43.D.D$44.D!
Re: Still-life 'factories'
Posted: December 1st, 2022, 8:17 pm
by Jormungant
Kazyan wrote: January 11th, 2016, 11:44 pm
I can't figure out how to extract a signal, but there's a variety of glider-activated factories that can come of variants on this:
Code: Select all
x = 27, y = 37, rule = B3/S23
10b2o$5b2o2bobo$5bo3bo$6b3ob4o$8bobo2bo$4b3obobo$3bo2bob2o$3b2o2$3b2o$
3bo2bo3b2o$4b3o2bo2bo$b3o6b2o$o3bo8b2o$b3o9bobo$4b3o6bo$3bo2bo$3b2o5$
9bo$8bobo$8bobo$9bo14b3o$24bo$25bo6$7b2o3b2o$8bo3bo$5b3o5b3o$5bo9bo!
This is one of few situations where the catalyst on the left cannot be replaced with a pair of fishhook eaters.
Kazyan did not manage to get a signal out, but it does not mean there is no factory from this:
G-to-block:
Code: Select all
x = 26, y = 43, rule = LifeHistory
4$12.2A$12.A.A2.2A$14.A3.A$10.4A.3A$10.A2.A.A$12.BABAB3A$11.2B.2ABA2.
A$10.7B2.2A$10.7B$8.6B5.2A$7.5B2AB.BA2.A$7.4BA2BA.B3A$6.6B2A3B3.3A$5.
4B2A7B.A3.A$6.2BABA6B3.3A$7.3BA4B.B3A$8.7B.BA2.A$9.6B4.2A$10.6B$10.5B
$10.5B$10.8B$10.4BA4B$9.4BABA3B$8.5BABA2B$8.6BA3B$8.9B$9.8B$10.6B$11.
3B2D$12.2BDC$10.5B$10.2A$11.A$8.3A$8.A!
the block has a 1 pixel that is both edgy and only on once the still life is in place, so that any asynchroneous interaction is predicable:
Code: Select all
x = 129, y = 74, rule = LifeHistory
15$23.B67.B$22.3B65.3B$20.6B62.6B$19.5BA2B7.3B7.2A41.5BA2B7.3B7.2A$
19.4BA4B5.5B6.A42.4BA4B5.5B6.A$13.2A2.6B3A13B2.BA.A36.2A2.6B3A13B2.BA
.A$13.A2.5BA18B.B2A37.A2.5BA18B.B2A$10.2A.A.5BABA19B36.2A.A.5BABA19B$
10.A2.3A.3BABA10B2A7B36.A2.3A.3BABA10B2A7B$11.2A2.BA2B.BA10BA2BA3B2DB
37.2A2.BA2B.BA10BA2BA3B2DB$13.4A2B3.3B3.B2.2B2A4BDC40.4A2B3.3B3.B2.2B
2A4BDC$13.A.4B.7B4.7B43.A.4B.7B4.7B$11.A.A.2A3.2A.B.2A4.5B5.CD2B34.A.
A.2A3.2A.B.2A4.5B5.CD2B$11.2A2.A5.A3.A6.2B6.D2BDB34.2A2.A5.A3.A6.2B6.
D2BDB$15.A.A.A.A.A.A.A11.2B2D3B37.A.A.A.A.A.A.A11.2B2D3B$16.2A.2A.A.A
.2A11.8B37.2A.2A.A.A.2A11.8B$22.A.A15.9B41.A.A15.4B3A2B$22.A.A14.11B
40.A.A14.3BAB2ABA2B$23.A15.11B41.A15.2BAB2ABA3B$39.12B56.B2ABA3BA3B$
39.5B2A5B.2B53.B2AB2A2BABAB.2B$39.4BA2BA6B2A52.5BABA2BA3B2A$39.5B2A7B
2A52.BAB2A9B2A$37.15B.B51.5BA3B2A4B.B$37.14B54.2B2A5BA4B$36.11B57.11B
$36.10B58.10B$36.11B57.11B$36.12B56.12B$36.13B55.13B$36.13B55.13B$28.
2A8.10B48.2A8.10B$29.A9.9B49.A9.9B$29.A.AB5.9B50.A.AB5.9B$30.2AB.12B
52.2AB.12B$32.14B54.14B$32.15B53.5BA9B$33.14B54.5BA8B$32.15B53.5BA9B$
30.17B51.17B$28.19B49.19B$28.2BC16B2.A46.2BD16B2.A$27.3BCBC4B.9B.A.A
44.3BDBD4B.9B.A.A$28.2B3C4B2.B.6B2.A46.2B3D4B2.B.6B2.A$27.5BC4B5.5B
48.5BD4B5.5B$26.10B5.B2A2B48.10B5.B2A2B$25.4B11.AB.A.B2A45.4B11.AB.A.
B2A$24.4B11.A.2A2.BA.A43.4B11.A.2A2.BA.A$23.4B12.A8.A42.4B12.A8.A$22.
4B12.2A8.2A40.4B12.2A8.2A$89.4B$88.4B$87.4B$86.4B$85.A3B$85.ABA$85.2A
!
Not all factory have this property, but I gathered a few that do:
Code: Select all
x = 178, y = 61, rule = LifeHistory
10$45.A$45.3A$48.A$47.2A$47.5B$12.2A35.4B$12.2A34.5B$48.6B105.2A$47.B
2A3B106.A$15.D31.B2A4B102.A4.A2.2A$9.3B2.D.D30.7B102.5A.A2.A$9.3B.D2.
C29.8B88.2A16.B.2A.A.2A$9.C4.2D30.7B90.A10.4AB3AB2.A2.A$9.CBC34.7B90.
A.AB7.A2.A.A3B2A.A$9.3C23.2A8.8B91.2AB.3B4.7B2.A.2A$9.2BC24.A8.9B92.
7B3.7B.A$9.3B24.A.AB4.10B92.16B.2A$37.2AB.14B92.15B$39.17B90.16B$39.
17B88.18B$40.15B44.2A41.19B$39.16B43.B2AB40.2BC15B3.2A$37.19B42.4B39.
3BCBC4B.7B5.A$35.20B44.2B6.DC33.2B3C4B2.7B4.A.2A$35.2BC17B43.5B3.BDBC
31.5BC4B2.8B4.A.A$34.3BCBC4B.9B43.11BDB30.10B4.7B5.B$35.2B3C4B2.8B43.
5B.6B30.4B10.8B2.B.3B$34.5BC4B2.8B43.2BC7B32.3B11.8B.7B$33.10B2.8B44.
2B2C7B29.4B12.17B$32.4B9.8B44.B2C8B29.2A14.18B$32.3B9.9B44.10B31.A13.
20B$30.4B10.10B44.10B27.3A15.19B$30.2C11.6BA4B45.9B2.2A23.A17.19B$31.
C10.8BA4B48.2B2ABA2.A42.17B$28.3C11.8BA5B48.ABAB3A44.11B$28.C13.12B2D
45.A2.A.A52.6B$42.11BDBC45.4A.3A50.7B$43.11BC50.A3.A48.8B$103.A.A2.2A
49.6B$103.2A55.5BD$160.4BDBD$160.5BDC$160.6B$161.4B$162.2B!
Re: Still-life 'factories'
Posted: January 18th, 2023, 9:21 am
by Anivec
G-to-beehive factory:
Code: Select all
x = 27, y = 24, rule = LifeHistory
9.5B$9.5B$8.7B$7.9B$7.10B$4.C2.12B$3.2BC.15B3.B$3.3C17B.B2A$4.21B2A$4.
22B$4.22B$4.10B2D4B3.B$2.2AB.7BD2BD2B$.A.AB2.7B2D2B$.A5.10B$2A4.3B2A6B
5.2A$7.BA2BA4B7.A$7.BA2BA6B.3B.A.2A$9.2A2B.2B2A2B2A.A2.A$14.BAB.A2.A.
2A$16.2A.2A$17.A.A$15.A.A2.A$15.2A2.2A!
It can be used as a bad clearance receiver:
Code: Select all
x = 43, y = 47, rule = B3/S23
bo$2bo$3o26$20bo$21bo$19b3o19b2o$41b2o4$18b2o$17bobo$17bo$16b2o7b2o11b
2o$24bo2bo11bo$24bo2bo11bob2o$25b2o5b2o2b2obo2bo$31bo2bo2bob2o$32b2ob
2o$33bobo$31bobo2bo$31b2o2b2o!
Re: Still-life 'factories'
Posted: January 30th, 2023, 6:31 pm
by EvinZL
Some simple edgy block and beehive factories not mentioned earlier
Code: Select all
x = 102, y = 72, rule = LifeHistory
52.2A39.2A$52.A40.A$54.A40.A$50.5A36.5A$49.A.B38.A.B$49.BA.3A35.BA.3A
$48.B2.2A2.A33.B2.2A2.A$31.2A14.6B.2A16.2A14.6B.2A$32.A13.2A3B22.A13.
2A3B$32.A.AB9.B2A2B2A21.A.AB9.B2A2B2A$15.2A16.2AB.3B6.3B.2A22.2AB.3B
6.3B.2A$.2A10.2B2AB17.7B2.7B25.7B2.7B$2.A10.4B18.15B26.15B$2.A.AB6.7B
17.14B27.14B$3.2AB.3B.8B16.15B26.15B$5.14B14.17B24.17B$5.14B12.19B22.
19B$6.13B12.2BD15B23.2BD15B$5.14B.2B8.3BDBD4B.7B23.3BDBD4B.7B$3.18B2A
8.2B3D4B2.7B23.2B3D4B2.7B$.18B.B2A8.4BD4B.8B3.2A18.4BD4B.8B3.3B$.2BD
15B2.B10.7B2.8B3.2AB18.7B2.8B.6B$3BDBD4B.9B22.6B5.3B27.6B2.8B$.2B3D4B
.9B21.8B3.6B24.18B$.4BD4B2.8B18.2B.18B20.2B.19B$2.7B3.8B17.2A20B19.2A
22B$13.8B16.2AB.18B19.2AB.20B$13.8B17.B2.15B2DB20.B2.19B$13.7B22.14B
2D25.14BD2B$13.7B23.14B27.12BDBDB$13.8B2D21.11B30.11BDBD$13.7BD2BD20.
2B.6B32.2B.6B3.D$11.2AB.6B2D$10.A.AB.8B$10.A4.8B44.A$9.2A5.7B43.A.A$
16.6B45.A$17.3B$17.2B46.5A2.A$64.A4.A2.3A$63.A.BAB7.A$60.A2.A.2AB6.2A
$59.A.A.A.4BA4.5B5.D$60.A2.A3.BABA5.7BDBD$63.2A2.A2BA3.9BDBD$68.2A2B.
11BD$70.16B$34.2B34.17B$32.3B2D33.17B$31.3BD2BD30.18B$19.2A10.4B2DB
28.21B$20.A9.8B28.2BD17B$20.A.AB5.10B26.3BDBD15B$21.2AB.3B.11B26.2B3D
14B$23.17B26.4BD14B$23.16B28.19B$24.13B33.15B$23.14B.2B31.14B$21.18B
2A32.13B$19.18B.B2A32.14B$19.2BD15B2.B33.16B$18.3BDBD4B.7B37.15B2A$
19.2B3D4B.7B37.15B2A$19.4BD4B2.7B34.2AB.14B$20.7B4.6B33.A.AB.10B.3B$
30.7B33.A5.3B3.B$31.4B34.2A$32.5B$35.2A$35.A$36.3A$38.A!
good clearance factories form simkin's list
Code: Select all
x = 59, y = 34, rule = LifeHistory
13.A$13.3A$16.A$15.2A$15.4B$17.B2A$16.BA.A$16.B2A$16.3B14.2A$7.2A5.5B
15.A13.2A$8.A5.5B15.A.AB9.B2A2B3.2B$8.A.AB.6B16.2AB.3B6.4B2.2B2D$9.2A
B.7B17.7B2.10B2D$11.10B16.21B$.2A8.12B15.20B$2.A8.13B.2D10.22B$2.A.AB
6.12BD2BD7.24B$3.2AB.3B3.11BD2BD5.26B$5.20B2D6.2BD22B$5.19B8.3BDBD4B.
14B$6.18B9.2B3D4B2.13B$5.17B11.4BD4B.13B$3.18B13.7B.13B$.19B20.15B$.
2BD16B20.14B$3BDBD4B.9B20.13B$.2B3D4B2.7B22.12B$.4BD4B3.5B20.B.12B$2.
7B5.4B19.2A11B$12.7B18.2A12B$12.2A.B.2A19.B.10B$13.A3.A22.9B$10.3A5.
3A$10.A9.A!
pond
Re: Still-life 'factories'
Posted: February 3rd, 2023, 8:40 am
by confocaloid
Is there a known (non-engineered) long boat factory where the reaction envelope does not extend diagonally past the long boat?
Code: Select all
#C An unfinished engineered long boat factory
#C based on the catalyst from https://conwaylife.com/forums/viewtopic.php?p=154907#p154907
x = 228, y = 231, rule = LifeHistory
6.DB2.2B$5.DBD5B2.2B$4.DBD11B$4.2D12B$4.14B$4.13B$4.13B$5.12B$5.11B$
6.10B$6.10B10.2A$7.8B11.A$6.10B3.2A2.BA.A$5.11B2.BA.A.B2A6.A$2.15B2.B
A3B7.A.A$.17B2.5B6.A.A$25B5.2A.3A$.26B4.B4.A$.27B.B2AB3A$2.26B.B2A.A$
.31B$2.28B$3.28B6.B2.2B$4.28B3.8B$2.29B.13B3.3B.B$2.2A4.11B.35B$3.A4.
11B2.35B$3A6.10B3.34B$A8.10B3.28B2A4B$12.8B2.28B2A2B.B2A$12.9B.30B3.B
A.A$14.35B9.A$14.18B2.12B12.2A$14.19B2.9B$14.29B$14.29B$14.29B$15.28B
$15.15B.8B.4B$16.7B.5B2.8B2.4B$16.6B4.3B2.9B2.4B$17.B13.10B2.4B$30.
12B2.4B$29.14B2.4B$28.8B.7B2.4B$27.9B2.7B2.4B$26.4B.6B2.7B2.4B$26.3B.
7B3.7B2.4B$24.2AB3.6B5.7B2.4B$23.A.AB3.6B6.7B2.4B$23.A6.6B7.7B2.4B$
22.2A5.8B7.7B2.4B$30.8B7.7B2.4B$29.9B8.7B2.4B$29.9B9.7B2.4B$29.10B9.
7B2.4B$29.5B2A3B10.7B2.4B$29.5B2A4B3.2A5.7B2.4B$29.11B3.A7.7B2.4B$29.
12BA.A8.7B2.4B$31.8B2.2A10.7B2.4B$31.7B16.7B2.4B$31.5B19.7B2.4B$23.2A
5.6B20.7B2.4B$24.A6.6B20.7B2.4B$24.A.AB2.8B20.7B2.4B$25.2AB2.9B20.7B
2.4B$27.12B21.7B2.4B$27.12B22.7B2.4B$27.10B.B2A21.7B2.4B$28.8B2.BA.A
21.7B2.4B$27.8B6.A22.7B2.4B$28.8B5.2A22.7B2.4B$29.7B30.7B2.4B$26.11B
30.7B2.4B$25.12B31.7B2.4B$25.12B32.7B2.4B$16.A8.11B34.7B2.4B$15.A.A2.
2A3.8B.4B33.7B2.4B$14.A.A2.A.A3.7B4.2A34.7B2.4B$14.A2.2A.B4.7B4.A36.
7B2.4B$15.A.A2.2B3.6B6.3A34.7B2.4B$14.2A.A.BA2B.7B8.A35.7B2.4B$17.A.A
.A9B45.7B2.4B$14.4A2.A.8B47.7B2.4B$14.A3.2A4.6B48.7B2.4B$16.A.B6.6B
48.7B2.4B$15.2AB2AB3.7B49.7B2.4B$18.2AB.8B51.7B2.4B$15.2A3.10B52.7B2.
4B$15.A4.6B2A3B52.7B2.4B$16.A3.6B2A2B5.2A47.7B2.4B$15.2A3.10B5.A49.7B
2.4B$19.11B2.BA.A50.7B2.4B$19.12B.B2A52.7B2.4B$18.15B55.7B2.4B$17.16B
56.7B2.4B$14.2B.16B57.7B2.4B$13.2A18B58.7B2.4B$13.2AB.17B58.7B2.4B$
14.B.4B.8B2.4B58.7B2.4B$21.7B4.4B58.7B2.4B$22.6B5.4B58.7B2.4B$24.4B6.
4B58.7B2.4B$26.3BA5.4B58.7B2.4B$27.BA.A5.4B58.7B2.4B$28.A.A6.4B58.7B
2.4B$29.A8.4B58.7B2.4B$30.3A6.4B58.7B2.4B$32.A7.4B58.7B2.4B$41.4B58.
7B2.4B$42.4B58.7B2.4B$43.4B58.7B2.4B$44.4B58.7B2.4B$45.4B58.7B2.4B$
46.4B58.7B2.4B$47.4B58.7B2.4B$48.4B58.7B2.4B$49.4B58.7B2.4B$50.4B58.
7B2.4B$51.4B58.7B2.4B$52.4B58.7B2.4B$53.B3A58.7B2.4B$54.A2B59.7B2.4B$
55.A61.7B2.4B$118.7B2.4B$119.7B2.4B$120.7B2.4B$121.7B2.4B$122.7B2.4B$
123.7B2.4B$124.7B2.4B$125.7B2.4B$126.7B2.4B$127.7B2.4B$128.7B2.4B$
129.7B2.4B$130.7B2.4B$131.7B2.4B$132.7B2.4B$133.7B2.4B$134.7B2.4B$
135.7B2.B3A$136.7B2.A3B$137.7B2.A3B$138.7B2.4B$139.7B2.4B$140.7B2.4B$
141.7B2.4B$142.7B2.4B$143.7B2.4B$144.7B2.4B$145.7B2.B3A$146.7B2.A2B$
147.7B2.A$148.7B$149.7B$150.7B$151.7B$152.7B$153.7B$154.7B$155.7B$
156.7B$157.7B$158.7B$159.7B$160.7B$161.7B$162.7B$163.7B$164.7B$165.7B
$166.7B$167.7B$168.7B$169.7B$170.7B$171.7B$172.7B$173.7B$174.7B$175.
7B$176.7B$177.7B$178.7B$179.7B$180.7B$181.7B$182.7B$183.7B$184.7B$
185.7B$186.7B$187.7B$188.7B$189.7B$190.7B$191.7B$192.B3A3B$193.A6B$
194.A6B$195.7B$196.7B$197.7B$198.7B$199.7B$200.7B$201.7B$202.7B$203.
7B$204.7B$205.7B$206.7B$207.B3A3B$208.A6B$209.A2.4B$213.4B$214.4B$
215.4B$216.4B$217.4B$218.4B$219.4B$220.4B$221.4B$222.4B$223.4B$224.B
3A$225.A2B$226.A!
Longboat related, collected from forum posts:
Code: Select all
#C H to long boat + blinker
#C https://conwaylife.com/forums/viewtopic.php?p=22534#p22534
x = 28, y = 22, rule = LifeHistory
17.A$17.3A$20.A$6.2A11.2A$7.A11.4B$7.A.AB5.D4.B2A$8.2AB.4BDB2.BA.A$
10.6BDB2.B2A$10.9B.3B$11.11B$10.12B$8.19B$6.22B$6.2BC19B$5.3BCBC4B.
12B$6.2B3C4B.6B2D4B$5.5BC10BDBD4B$4.10B2.4BDBD5B$3.4B11.3BD5B$2.4B13.
7B$.4B15.4B$4B17.B!
Code: Select all
#C H to long boat
#C https://conwaylife.com/forums/viewtopic.php?p=38676#p38676
x = 28, y = 28, rule = LifeHistory
10.2A$11.A$9.A$7.4A$6.A5.2A$5.A2.4A.A$6.2A.A.B5.A$7.A.4B4.3A$7.A.4B7.
A$5.A.A.2A3B5.2A$5.2A.A.A3B5.4B$8.A.4B.B5.B2A$8.2A8B2.BA.A$9.9B2.B2A$
10.9B.3B$11.11B$10.12B$8.19B$6.22B$6.2BC19B$5.3BCBC4B.12B$6.2B3C4B.6B
2D4B$5.5BC10BDBD4B$4.10B2.4BDBD5B$3.4B11.3BD5B$2.4B13.7B$.4B15.4B$4B
17.B!
Code: Select all
#C MWSS to long boat
#C https://conwaylife.com/forums/viewtopic.php?p=24298#p24298
x = 44, y = 22, rule = LifeHistory
12.2A$10.2B2AB7.3B$10.4B7.5B$9.5B7.5B$9.6B5.6B$2.B6.6B4.7B$.A2B.3B.7B
.B.9B.B.B.B.B.B.B.C$A.A36BC2B.C$.A36BC3B$2.36BC4BC$4.34B5C$2.41B$2.2A
4.23B.B.B.B.B.B$3.A7.18B$3A10.4B2A8B$A12.4B2AB2.4B$10.2A.7B3.2B$10.2A
.7B$11.6B2D$12.4BDBD$14.BDBD$15.BD!
Code: Select all
#C modified Bandersnatch
#C https://conwaylife.com/forums/viewtopic.php?p=98401#p98401
x = 36, y = 42, rule = LifeHistory
CBC$B2CB$.C3B$2.4B25.A$3.4B23.A.A$4.4B22.A.A$5.4B20.2A.3A$6.4B7.2A11.
B4.A$7.4B5.B2AB4.2B2.B2AB3A$8.4B3.7B.6B2A.A$9.22B$10.19B$11.20B$12.
20B$11.21B$10.24B$10.23B2D$10.13BA8BDBD$8.14BABA6BDBD$8.14BA2BA6BD$7.
16B2A5B$6.2AB2.19B$5.A.AB2.20B$5.A4.3B.16B2A$4.2A3.21B2A$9.10B2.7B.2B
$9.10B2.6B$11.8B3.4B$11.4B.2B3.2B$12.3B5.B2AB$12.4B5.2A$13.4B$14.4B$
15.4B$16.4B$17.4B$18.4B$19.4B$20.4B$21.2BDB$22.2B2D$23.2D!
Code: Select all
#C non-rewindable G -> long boat + G
#C https://conwaylife.com/forums/viewtopic.php?p=154611#p154611
x = 27, y = 17, rule = LifeHistory
14.C$13.C.C7.2A$13.2C9.A$3.2A19.A.A$3.A2.A15.2A.2A$4.2A.A12.A2.A$.3A
2.A13.2A.A.2A$A3.2A16.A.A.A$.2A17.2A2.A$2.A.2A15.A.2A$2.A2.A10.3A2.A$
3.2A11.A5.3A$17.A6.A$7.2A$8.A$5.3A$5.A!
Re: Still-life 'factories'
Posted: March 4th, 2023, 5:10 am
by iNoMed
Kazyan wrote: November 18th, 2015, 4:03 pm
Would anyone like to take a crack at completing this? I can't seem to perturb the top so that the fishhook on the right survives without canceling the beehive's restoration.
p3 "completion" (still not quite a valid highway robber though):
Code: Select all
x = 23, y = 24, rule = B3/S23
19b2o$4bo14b2o$3bobo$3b2o5$20b2o$19bo2bo$20bobo$bo14b2o3bo$2bo4b2o8bob
2o$3o3bo2bo9bo$7b2o10bo2$14b2o$14bobob2o$15b2obo2bo$18bob2o$12b2o4bo$
13bo3b2o$10b3o$10bo!
Re: Still-life 'factories'
Posted: March 18th, 2023, 6:35 am
by Jormungant
Here is an odd H-to-hive factory:
Code: Select all
x = 43, y = 50, rule = LifeHistory
3$22.2A$18.A.A2.A$16.3A.2A$15.A4.B$16.3AB2AB3.2B$18.A.2AB2.4B5.2A$22.
7B5.A$21.9B.BA.A$21.9B.B2A$21.11B$21.11B$15.B4.11B$14.3B3.10B$12.6B2.
12B$6.4B2.7B.13B$4.29B$3.B2ABD25B$3.3ABCAD23B$3.B2AB3CB2A21B$3.3AB2AD
B2A21B$3.2A30B$8.26B$10.B2.20B$12.20B.B.B$11.24B2A$10.25B2A$5.2A.A24B
.2B$5.A.2A.21B$11.18B$11.6B2A10B$15.2B2A.10B$13.5B6.6B$13.2A10.6B$14.
A10.3BA3B2.B$11.3A11.2BABA7B$11.A13.2BABA7B.2C$25.3BA9B2C$23.2AB.10B$
22.A.AB2.6B2DB$22.A7.3BD2BD$21.2A7.4B2D$31.4B$30.4B$29.4B$28.4B$30.B!
The only feature here is that if the marked block is missing, a glider is emitted instead, which could have marginal uses as that glider from an edge shooter.
Re: Still-life 'factories'
Posted: April 11th, 2023, 8:16 pm
by Anivec
Trans-boat with tail factory:
Code: Select all
x = 34, y = 44, rule = LifeHistory
15.2B$15.BA2B$14.BABA2B$13.2BABA2B$13.3BA3B$12.7B$13.7B$7.2A5.7B$8.A5.
7B$8.A.AB2.9B$9.2AB.11B$11.12B$11.13B$3.2A6.12B$4.A6.13B.4B$4.A.AB4.18B
$5.2AB.23B$7.26B$7.26B$8.25B$7.26B$5.27B$3.29B$3.2BC25B$2.3BCBC4B.17B
$3.2B3C4B2.16B$2.5BC22B$.9B2D16B.B2A$4B6.DBD10B2.B3.BA.A$3B8.D10B10.A
$2B9.B3D7B10.2A$B10.3BD6B$11.11B$11.11B$11.11B$8.2A.11B$8.A.A12B$5.2A
.A.BA2B2.6B2A$5.A2.3ABAB3.5B2A$7.A3.2A4.6B$6.2A.A8.2B$8.A.3A$8.A3.A$7.
2A!
Re: Still-life 'factories'
Posted: August 7th, 2023, 7:13 pm
by Anivec
Extremely edgy eater factory partial:
Code: Select all
x = 21, y = 29, rule = LifeHistory
14.A$13.A.A3.2A$13.A.A3.2A$14.A14$C$C.C$3C$2.C7$5.2A$5.2A!
Re: Still-life 'factories'
Posted: August 13th, 2023, 9:36 am
by Jormungant
AlbertArmStain wrote: August 12th, 2023, 9:46 pm
Direct g-to-pi by Mvr with no bait objects:
Code: Select all
x = 13, y = 15, rule = B3/S23
6bo$7bo$5b3o3b2o$11b2o2$2o$o2bob2o$b3obo$5bo$b3ob3o$o2b2o3bo$bo4b2o$2b
3obo$4bobo$5bo!
G-to-hive with some kind of use:
Code: Select all
x = 34, y = 26, rule = B3/S23
2$26bo$24b3o$23bo$23b2o2$21bo$22bo$20b3o3b2o$26b2o2$15b2o$15bo2bob2o$
16b3obo$20bo$4b3o9b3ob3o$6bo8bo2b2o3bo$5bo10bo4b2o$17b3obo$19bobo$20b
o!
Addendum: And 1 less row on that g-to-hive
Code: Select all
x = 21, y = 19, rule = LifeHistory
11.3A5.A$13.A3.3A$12.A3.A$16.2A$12.2D$11.D2.D$12.2D.A$16.A2.2A$14.3A
2.2A2$8.2A$3A5.A2.A.2A$2.A6.3A.A$.A11.A$9.3A.3A$8.A2.2A3.A$8.2A4.2A$
10.4A$10.A2.A!
Re: Still-life 'factories'
Posted: August 13th, 2023, 11:58 am
by dvgrn
Jormungant wrote: August 13th, 2023, 9:36 am
G-to-hive with some kind of use...
Nice! The known beehive stopper is 25x16, so this new one at only 13x20 might come in quite handy for cases where circuitry doesn't have to be constructible -- e.g., a more compact HashLife-friendly metacell.
Re: Still-life 'factories'
Posted: September 22nd, 2023, 3:58 am
by qqd
Glider-to-pond converter with four transparent objects:
Code: Select all
x = 40, y = 33, rule = B3/S23
14bo$13bobo$13bobo$14bo2$23bo$11b2o9bobo$11b2o8bo2bo$22b2o$6b2o23b2o$
5bo2bo22bobo$6b2o25bo$33b2o3$9b2o$4b2o3bo$2obobo4b3o$ob2obobo4bo$6b2o
11$37b3o$37bo$38bo!
Re: Still-life 'factories'
Posted: September 27th, 2023, 11:58 am
by affamatodidio
Anyone know of a way to convert the following active blob into a beehive, in the red placement?
Code: Select all
x = 7, y = 4, rule = LifeHistory
.2D$D2.D$.2CA.2A$3.A.A!
Re: Still-life 'factories'
Posted: October 19th, 2023, 11:37 am
by Jormungant
Well, nothing new here , but I just aggregated glider-to-X factories that can be used as stopper, that for some odd reason did not make it to this thread, including the
g-to-block which is toggle-ready:
Code: Select all
x = 235, y = 59, rule = LifeHistory
10$17.2A$11.C4.B2AB$10.B.C3.3B82.2B8.2A$10.3CB3.B.B80.4B7.A$11.10B5.
2A71.7B2.BA.A99.2A$12.9B3.BA.AB68.9B2.B2A99.B2AB$13.5B2D5B2A2B26.3B5.
2A25.B4.15B26.2A59.2BC11.2B$14.3BD2BD4B.B.B2A23.4B5.A25.3B.3B2D11B27.
A27.3A5.A24.CBC10.2B$15.3B2D6B2.BA.A22.5B.BA.A25.6BD2BD10B24.A3.3A26.
A3.3A25.2C8.5B$14.13B4.A22.5B.B2A27.6B2D9B20.3B3.4A3.A24.A3.A29.B7.7B
$15.12B4.2A12.B8.7B29.16B20.2D5B3.B.A.A28.2A36.7B$11.15B18.3B6.8B29.
16B19.D2BD6B2AB2A25.2D33.2D13B$10.14B2A18.4B4.8B4.2A25.16B17.2B2D7B2A
27.D2.D32.2D14B$10.14B2A19.15B3.A.A27.14B17.11B3.2A25.2D.A32.16B$11.
14B20.2D13B3.A31.3BC8B18.3BC6B4.A29.A2.2A29.14B$14.11B19.D2BD13B.2A
31.4BC6B20.3BC5B3.A28.3A2.2A31.12B$15.9B21.2D15B34.B3C6B21.3C6B2.2A
65.11B$6.3D5.D10B21.16B3.2A30.9B21.9B25.2A43.10B$8.D5.D9B26.3BC8B.B2.
A30.9B21.9B17.3A5.A2.A.2A39.9B$7.D7.8B28.3BC8B3A31.2B2A3B.B2A19.2B2A
3B.B2A17.A6.3A.A40.9B$16.7B29.3C6B.BA31.3BA2BA2B.BA.A16.3BA2BA2B.BA.A
15.A11.A40.2B2A3B.B2A$21.2A29.9B3.2A28.2A3BABAB5.A15.2A3BABAB5.A23.3A
.3A36.3BA2BA2B.BA.A$21.A30.9B4.A27.A.AB.2BA4B3.2A10.2A.A.AB.2BA4B3.2A
21.A2.2A3.A34.2A3BABAB5.A$22.3A27.2B2A3B.B2A2.A.2A24.A.2B6.2A16.A.A.
2B6.2A26.2A4.2A34.A.AB.2BA4B3.2A$24.A25.3BA2BA2B.BA.A.A.2A22.A.2AB7.A
16.A2.2AB7.A29.4A36.A.2B6.2A$49.2A3BABAB5.A.A24.A.A2.B8.3A14.2A2.B8.
3A26.A2.A34.A.2AB7.A$45.2A.A.AB.2BA4B3.A.A24.A2.2A11.A16.2A11.A63.A.A
2.B8.3A$46.A.A.2B6.2A4.A26.A.A29.A76.A2.2A11.A$45.A2.2AB7.A31.2A2.A
29.A76.A.A$46.2A2.B8.3A31.2A28.2A75.2A2.A$48.2A11.A141.2A$48.A$49.A$
48.2A!
Re: Still-life 'factories'
Posted: October 19th, 2023, 8:50 pm
by yoleo
H-powered block keeper:
Code: Select all
x = 54, y = 28, rule = LifeHistory
8.2A28.2A$7.B2AB5.2A19.B2AB5.2A$8.3B5.A21.3B5.A$9.B3.BA.A22.B3.BA.A$
5.7B.B2A19.7B.B2A$4.10B20.10B$4.7B2EB20.7B2EB$4.6BE2BE20.6BE2BE$2.2AB
.5B2EB18.2AB.5B2EB$.A.AB.8B17.A.AB.8B$.A4.8B3.2B12.A4.8B3.2B$2A5.12B
11.2A5.12B$7.14B16.14B$7.15B15.15B$5.17B13.17B$3.19B11.19B$3.2BC15B
12.2BC15B$2.3BCBC12B12.3BCBC12B$3.2B3C13B12.2B3C13BD$2.5BC13B11.5BC
13B2D$3.10B2E8B9.11B2E7B2D$.4B5.3B2EB5.2A7.2AB7.3B2E6B2D$.2A18.A8.2AB
11.8B$.2A19.3A24.B$24.A17.2A4.3B$43.A3.B2A$40.3A5.2A$40.A!
It's basically a derivative of the H-to-B on the right: just eat the pi instead of turning it into a B.
Edit: huh here the block switches places:
Code: Select all
x = 46, y = 79, rule = LifeHistory
3$14.2A$14.2A6.2A$22.A$20.A.A$20.2A2$17.2A$16.A2.A$8.2A7.2A$7.A.A$7.A
$6.2A2$39.2A$38.A2.A$38.A.A.A$11.C24.2A.A2.A$11.C.C22.A2.A.A$11.3C24.
2A.2A$13.C25.A$19.2D15.3A2.2A$19.2D5.2C8.A2.3A$7.2A17.2C10.A4.A$7.2A
28.2A2.3A$38.A.A$36.A.A2.A$36.2A2.2A7$18.D9.D$18.D8.3D$18.D7.D.D.D$
18.D9.D$18.D9.D$18.D9.D$18.D9.D$16.D.D.D7.D$17.3D8.D$18.D5$12.2A$12.
2A6.2A$20.A$18.A.A$18.2A2$15.2A$14.A2.A$6.2A7.2A$5.A.A$5.A$4.2A2$37.
2A$36.A2.A$36.A.A.A$9.C24.2A.A2.A$9.C.C22.A2.A.A$9.3C24.2A.2A$11.C25.
A$17.2C15.3A2.2A$17.2C5.2D8.A2.3A$5.2A17.2D10.A4.A$5.2A28.2A2.3A$36.A
.A$34.A.A2.A$34.2A2.2A!
Edit 2: another one that switches between 2 arrangements
Code: Select all
x = 56, y = 29, rule = LifeHistory
$13.2A28.2A$13.A.A27.A.A$14.AB6.2A20.AB6.2A$13.2B7.A20.2B7.A$13.3B3.B
A.A20.3B3.BA.A$11.7B.B2A19.7B.B2A$10.10B20.10B$8.12B18.12B$6.14B16.
14B$6.2BC12B15.2BC12B$5.3BCBC11B13.3BCBC11B$6.2B3C12B13.2B3C12B$5.5BC
11B13.5BC11B$4.17B13.17B$4.3B7.3B2DB14.3B7.3B2CB$2.4B8.3B2D2B11.4B8.
3B2C2B$2.2A10.7B11.2A10.7B$3.A9.5B.3B11.A9.5B.3B$3A11.6BDB8.3A11.6BCB
$A12.3B2EBDBD8.A12.3B2EBCBC$14.2B2EB2D23.2B2EB2C$15.5B25.5B$15.3B27.
3B$16.B29.B$15.A.A27.A.A$14.A.2A26.A.2A$14.A29.A$13.2A28.2A!
Re: Still-life 'factories'
Posted: October 19th, 2023, 10:22 pm
by Anivec
yoleo wrote: October 19th, 2023, 8:50 pm
Edit: huh here the block switches places:
Code: Select all
x = 46, y = 79, rule = LifeHistory
3$14.2A$14.2A6.2A$22.A$20.A.A$20.2A2$17.2A$16.A2.A$8.2A7.2A$7.A.A$7.A
$6.2A2$39.2A$38.A2.A$38.A.A.A$11.C24.2A.A2.A$11.C.C22.A2.A.A$11.3C24.
2A.2A$13.C25.A$19.2D15.3A2.2A$19.2D5.2C8.A2.3A$7.2A17.2C10.A4.A$7.2A
28.2A2.3A$38.A.A$36.A.A2.A$36.2A2.2A7$18.D9.D$18.D8.3D$18.D7.D.D.D$
18.D9.D$18.D9.D$18.D9.D$18.D9.D$16.D.D.D7.D$17.3D8.D$18.D5$12.2A$12.
2A6.2A$20.A$18.A.A$18.2A2$15.2A$14.A2.A$6.2A7.2A$5.A.A$5.A$4.2A2$37.
2A$36.A2.A$36.A.A.A$9.C24.2A.A2.A$9.C.C22.A2.A.A$9.3C24.2A.2A$11.C25.
A$17.2C15.3A2.2A$17.2C5.2D8.A2.3A$5.2A17.2D10.A4.A$5.2A28.2A2.3A$36.A
.A$34.A.A2.A$34.2A2.2A!
Here’s a much better stator for that catalyst:
Code: Select all
x = 37, y = 27, rule = LifeHistory
8.2A$8.2A6.2A$16.A$14.A.A$14.2A2$11.2A$10.A2.A$2.2A7.2A$.A.A$.A$2A2$33.
2A$32.A.A$32.A$5.C24.2A.A$5.C.C22.A2.A$5.3C24.2A.2A$7.C25.A.A$30.3A2.
A$30.A2.2A$32.A$31.2A$32.A.2A$30.A.A.2A$30.2A!
G-to-random-junk:
Code: Select all
x = 32, y = 34, rule = B3/S23
16b2o$16bo$17bo$16b2o2$bo14b4o$2bo13bo2bo$3o15bo$19b3o$21bo10$17b2o$17b
2o4$30b2o$25bo2bo2bo$25b6o2$25b2ob3o$26bobo2bo$24bobobobo$24b2o3bo$10b
2o$10b2o!
Re: Still-life 'factories'
Posted: October 24th, 2023, 2:04 pm
by Extrementhusiast
AlbertArmStain wrote: October 19th, 2023, 10:22 pm
yoleo wrote: October 19th, 2023, 8:50 pm
Edit: huh here the block switches places:
Here’s a much better stator for that catalyst:
Here's a much better catalyst:
Code: Select all
x = 36, y = 26, rule = LifeHistory
8.2A$8.2A6.2A$16.A$14.A.A$14.2A2$11.2A$10.A2.A$2.2A7.2A$.A.A$.A$2A5$
5.C$5.C.C22.2A$5.3C23.A$7.C23.A.2A$30.2A.A$30.A2.A$31.2A.2A$32.A.A$
32.A.A$33.A!
Re: Still-life 'factories'
Posted: October 28th, 2023, 8:50 pm
by EvinZL
No-clearance block factory whose block can be tested on two different lanes and is cool to watch
Code: Select all
x = 47, y = 47, rule = LifeHistory
45.B$44.3B$43.4B$42.5B$41.5B$34.2A4.5B$19.2A12.B2A2B.5B$20.A13.9B$20.
A.AB8.10B$21.2AB.3B3.6BA3B$23.7B.5BA3B$23.13B3A$24.14B$23.11B2CB.2B$
21.13B2C3B2A$19.20B2AB$19.2BC20B$18.3BCBC16B.B2A$19.2B3C16B.BA.A$19.
4BC16B4.A$20.20B4.2A$24.5B.8B.B2A$23.5B3.7B.BA.A$22.5B4.6B5.A$21.5B5.
6B5.2A$20.5B5.6B$19.5B6.7B$18.5B6.10B$17.5B8.9B$16.5B11.3B.4B$15.5B
12.4B.2A2B$14.5B14.3BA.AB$13.5B15.3B2A$12.5B18.3B$11.5B20.B$10.5B$9.
5B$8.5B$7.5B$6.5B$5.5B$4.5B$3.5B$2.5B$.5B$5B$.3B!