Hassler Search Bench

Draw fixed parts and search regions, then let the browser try fills or library parts. Works for any two-state range-1 rule: B/S, Hensel letters (B3/S2-i34q) or MAP.

layers x –, y –

How to use

  1. Set the rule and the generation (or range) at which the pattern should be back.
  2. Click a layer and paint: Catalyst for fixed parts, Beginning for the active object, Target for what must be there at the end, Search, Half or SearchCat for where random cells may go.
  3. Press a search button. Random fill and Try every fill put cells in the random layers. Place library parts tries each library entry inside the Search layer.
  4. Click a result, then Step or Play. Jump to gen and Play to gen go to the generation named in that result and stop there (a dot marks it); a hollow blue or red box marks a Catalyst or Target cell that is off at that moment. TARGET means the Target layer was matched exactly at that generation. OSC and HIT are true oscillators (still lifes and period 2 are ignored unless you lower the smallest period). Δ results are near misses: that many cells wrong. Every solved fill (TARGET, OSC) is listed, up to 2,000 of each; only the near misses are limited, by "Near misses kept". Fills where the fixed pattern (for example a still life you want hassled) is never altered are ignored; untick that box to see them. Set "still altered at gen ≥" to rule out fills where the object recovers early and then just sits there (0 turns this off). "Come back clean" counts every extra live cell within two cells of a catalyst as an error, so a catalyst that is back but about to be wrecked is not a hit.

Click a painted cell to erase it. Zoom with − and +, the keys - = 0, or Ctrl/⌘ + mouse wheel; scroll the grid to move around. Select area: drag a rectangle, then fill it, clear it, or move its contents with the arrow buttons or arrow keys (Delete clears, Esc deselects). The two Example buttons load a ready problem for each kind of search.

Rule and timing

Layers (click to select, then paint)

No area selected
Move
Import an RLE into the selected layer

Every import uses the same grid coordinates, so separately imported layers stay aligned.

Search

Fill searches use the seven layers the way 8than888's searcher does and also flag true oscillators. Try every fill needs 24 or fewer random cells. Kinetic symmetry is for patterns that turn into their own mirror image or rotation part-way through the period, such as shuttles: tick it, pick the centre, and Place adds each part's partner in the right earlier phase and tests whether the whole pattern becomes its image after half a period (a quarter for 90° turns). With a symmetry chosen, every random cell and every placed part gets its mirror images about the centre of the fixed pattern (shown dashed), so you only paint the region on one side and each symmetric group counts as one random cell; the fixed pattern must have that symmetry itself. Place library parts uses Catalyst + Beginning as the fixed pattern and the Search layer (or the margin) as the allowed area.

Library for Place (name RLE per line)

The default entries are Life objects. Under another rule, entries that are not periodic are dropped and named in the status line; add that rule's own still lifes and sparkers.

Results (click to view and run)

Text out / in

Problem text is the kit's .prob format (gens/range, layer, rect lines), so a setup can move between this page and fillsearch / placesearch.